首页> 外文OA文献 >On the Stress Concentration on the Cold-Forming Dies : 3rd Report, The Case of Die with an Ejector Hole

【2h】

On the Stress Concentration on the Cold-Forming Dies : 3rd Report, The Case of Die with an Ejector Hole

机译：在冷成型模具上的应力集中：第3次报告，用喷射器孔的模具

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Tsuneo HIRAI; Shin TSUKUMA; Taichi FUJII; Tsuneo AZUMA;
展开▼
作者单位

展开▼
年度 1978
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Basic Experimental Studies of the Local Buckling Strength of Carbon Steel Square Pipes with a Circular Hole Subjected to an Eccentric Axial Compressive Load (3rd Report, In the Case of Eccentric Load at the Upper End and Axial One at the Lower End) [J] . Toshiyuki KITAZAWA 日本機械学会論文集. A編 . 1999,第636期

机译：带有偏心轴向压缩载荷的圆孔碳钢方管局部屈曲强度的基础实验研究（第三次报告，上端为偏心载荷而下端为轴心载荷）
2. Stress concentration factors and stress-gradients due to circular holes in radially functionally graded panels subjected to anti-plane shear loading [J] . Kubair D.V. Acta Mechanica . 2013,第11期

机译：径向功能梯度板中承受反平面剪切载荷的圆孔引起的应力集中系数和应力梯度
3. STRESS CONCENTRATION AND STRESS GRADIENTS IN A STRETCHED STRIP WITH A HOLE [J] . V. F. Kozhevnikov Russian engineering research . 2002,第3期

机译：带孔的拉伸条中的应力集中和应力梯度
4. The Stress and Strain Concentrations Associated with Two Interacting Holes in a Finite Thickness Elastic Plate Subjected to Tensile Stress [C] . Zheng Yang, Jian Hou, Guoyin Wang International Conference on Fracture and Strength of Solids . 2011

机译：在经过拉伸应力的有限厚度弹性板中的两个相互作用孔相关的应力和应变浓度
5. STRESS INTENSITY FACTORS FOR FATIGUE CRACKS AT HOLES UNDER CYCLIC STRESS GRADIENTS (PLATES, INTERPOLATIONS, INTERFEROMETRY). [D] . PEREZ, RIGOBERTO. 1986

机译：循环应力梯度（板，插值，干涉法）下孔疲劳裂纹的应力强度因子。
6. Dying among older adults in Switzerland: who dies in hospital who dies in a nursing home? [O] . Xhyljeta Luta, Radoslaw Panczak, Maud Maessen, 2016

机译：在瑞士的老年人中死亡：谁死于医院谁死于养老院？
7. A Numerical Method for Stress Concentration Problems of Infinite Plates with Multiholes Subjected to Uniaxial Tension : 3rd Report, Cases of a Row of Holes [O] . Minoru HAMADA, Iwao MlZUSHIMA, Tadashi MASUDA 1972

机译：具有单轴张力的多孔板的应力集中问题的数值方法：第3次报告，孔的情况
8. Four Studies in the Theory of StressnConcentration PART I The Effect of Holes on the Strength of Materials under Complex Stress Systems PART II Stress Concentration due to Holes and Grooves other than Elliptical in Form PART III The Effect of Surface Irregularities on Fatigue Strength PART IV Stress Concentration in Twisted Shafts [R] . H. L. Cox 1953

机译：应力集中理论中的四项研究第一部分复杂应力系统下孔对材料强度的影响第二部分第三部分中除椭圆以外的孔和槽引起的应力集中表面不规则对疲劳强度的影响第四部分应力集中在扭曲的轴

On the Stress Concentration on the Cold-Forming Dies : 3rd Report, The Case of Die with an Ejector Hole

著录项

引文网络

相似文献

相关主题

期刊订阅