首页> 外文OA文献 >A Defected Structure Shaped CPW-Fed Wideband Microstrip Antenna for Wireless Applications
【2h】

A Defected Structure Shaped CPW-Fed Wideband Microstrip Antenna for Wireless Applications

机译:用于无线应用的缺差结构形CPW框架宽带微带天线

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A coplanar waveguide- (CPW-) fed compact wideband defected structure shaped microstrip antenna is proposed for wireless applications. Defected structure is produced by cutting the U shape antenna in the form of two-sided T shape. The proposed antenna consists of two-sided T shape strip as compared to usual monopole patch antenna for minimizing the height of the antenna. The large space around the radiator is fully utilized as the ground is on the same plane as of radiator. Microstrip line feed is used to excite the proposed antenna placed on an FR4 substrate (dielectric constant εr=4.4). The antenna is practically fabricated and simulated. Simulated results of the proposed antenna have been obtained by using Ansoft High-Frequency Structure Simulator (HFSS) software. These results are compared with measured results by using network analyzer. Measured result shows good agreement with the simulated results. It is observed that the proposed antenna shows a wideband from 2.96 GHz to 7.95 GHz with three bands at f1=3.23 GHz, f2=4.93 GHz, and f3=7.04 GHz.
机译:为无线应用提出了一种共面波导 - (CPW-)馈电宽带差的结构形微带天线。通过以双面T形的形式切割U形天线来产生缺陷的结构。与通常的单极贴片天线相比,所提出的天线包括双面T形条带,以最小化天线的高度。随着地面处于与散热器的平面相同,散热器周围的大空间充分利用。微带线馈送用于激发放置在FR4基板上的所提出的天线(介电常数εr= 4.4)。实际制造和模拟天线。通过使用ANSoft高频结构模拟器(HFSS)软件获得了所提出的天线的模拟结果。使用网络分析仪将这些结果与测量结果进行比较。测量结果显示了与模拟结果吻合良好。观察到所提出的天线在F1 = 3.23 GHz,F2 = 4.93GHz和F3 = 7.04 GHz的情况下,具有2.96GHz至7.95GHz的宽带。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号