首页> 外文OA文献 >Direct measurement of cochlear parameters for automatic calculation of the cochlear duct length
【2h】

Direct measurement of cochlear parameters for automatic calculation of the cochlear duct length

机译:直接测量耳蜗管长自动计算的耳蜗参数

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

BACKGROUND: Cochlear morphology and cochlear duct length (CDL) play important roles in the selection of appropriate electrodes. Cochlear parameters such as diameter (A value) and width (B value) are used as inputs for calculating the CDL. Current measurements of these parameters are inefficient and time consuming. Recently developed otological planning software (OTOPLAN) allows surgeons to directly measure these parameters and then automatically calculate the CDL. OBJECTIVES: The primary objective was to validate this new software for measuring the cochlear parameters and CDL. The secondary aim was to investigate the correlation between each cochlear parameter with the calculated CDL. DESIGN: Retrospective. SETTINGS: Ear specialist hospital. PATIENTS AND METHODS: The measurement of cochlear diameter (A value) was chosen as the validation parameter. To do this, the A value was measured by a neurotologist on the new OTOPLAN planning software and was validated to the one measured on the currently used DICOM viewer. Upon the validation of the OTOPLAN software, the other two cochlear parameters, namely width (B value) and height (H value) were measured, and CDL was automatically calculated. Finally, the correlation of all parameters with the CDL was statistically analyzed. MAIN OUTCOME MEASURES: Validation of OTOPLAN and CDL estimation. SAMPLE SIZE: 88 ears. RESULTS: There was no significant difference between the A-value measured on the DICOM viewing software and that on the new planning software by the two independent neurotologists (P=.27). Both A-and B-values showed a high positive correlation to the CDL. However, the B-value showed a stronger correlation to the CDL than the A-value (r=0.63 for A, and r=0.96 for B). CONCLUSION: The direct measurement of cochlea parameters and automatic calculation of the CDL could improve the efficiency of clinical workflow and make otology surgeons more independent. Moreover, the cochlear width (B) has a strong correlation to the CDL. Thus, we suggest using the combination of A and B to accurately estimate the CDL rather than using only one. LIMITATIONS: Single center and small sample size. CONFLICT OF INTEREST: None. No relationship with manufacturers.
机译:背景:耳蜗形态和耳蜗管长度(CDL)在选择适当的电极中起重要作用。诸如直径(值)和宽度(B值)的耳蜗参数用作计算CDL的输入。这些参数的电流测量值效率低,耗时。最近开发的otological计划软件(Otcoplan)允许外科医生直接测量这些参数,然后自动计算CDL。目标:主要目标是验证这种新软件,以测量脚踏参数和CDL。次要目的是研究每个触摸CD1的每个耳蜗参数之间的相关性。设计:回顾性。设置:耳朵专业医院。患者和方法:选择耳蜗直径(值)的测量作为验证参数。为此,通过新otpolan计划软件的神经医生测量值,并被验证到当前使用的DICOM查看器上测量的那个。在验证OTOPLAN软件时,测量其他两个耳蜗参数,即宽度(B值)和高度(H值),并自动计算CDL。最后,统计分析了所有参数与CDL的相关性。主要观察措施:互渗透验证和CDL估计。样品大小:88耳。结果:在DICOM观看软件上测量的A值之间没有显着差异,两个独立神经外科医师的新规划软件(P = .27)。 A-和B值均显示与CDL高的正相关。然而,B值显示与CDL的相关性比A值(r = 0.63,r = 0.96为b)。结论:COCHLEA参数的直接测量和CDL的自动计算可以提高临床工作流程的效率,使耳科外科医生更加独立。此外,耳蜗宽度(b)与CD1具有很强的相关性。因此,我们建议使用A和B的组合来准确地估计CDL,而不是仅使用一个。限制:单中心和小样本大小。利益冲突:无。与制造商无关。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号