首页> 外文OA文献 >Risk of Revision Following Total Hip Arthroplasty: Metal-on-Conventional Polyethylene Compared with Metal-on-Highly Cross-Linked Polyethylene Bearing Surfaces

【2h】

Risk of Revision Following Total Hip Arthroplasty: Metal-on-Conventional Polyethylene Compared with Metal-on-Highly Cross-Linked Polyethylene Bearing Surfaces

机译：在总髋关节置换术后的修订风险：与金属对常规聚乙烯相比，与金属上高度交联的聚乙烯轴承表面相比

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Elizabeth Paxton; Guy Cafri; Leif Havelin; Susanna Stea; Francesc Pallisó; Stephen Graves; Daniel Hoeffel; Art Sedrakyan;
展开▼
作者单位

展开▼
年度 2014
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Metal-on-conventional Polyethylene Total Hip Arthroplasty Bearing Surfaces Have a Higher Risk of Revision Than Metal-on-highly Crosslinked Polyethylene: Results From a US Registry [J] . Paxton Elizabeth W., Inacio Maria C. S., Namba Robert S., Clinical Orthopaedics and Related Research . 2015,第3期

机译：常规聚乙烯总髋关节置换术轴承表面比金属对高度交联的聚乙烯的修复风险更高：美国注册表的结果
2. CORR Insights(A (R)): Metal-on-conventional Total Hip Arthroplasty Bearing Surfaces Have a Higher Risk of Revision Than Metal-on-highly Crosslinked Polyethylene: Results From a US Registry [J] . McCalden Richard W. Clinical Orthopaedics and Related Research . 2015,第4期

机译：CORR Insights（A（R））：与传统的高交联聚乙烯相比，传统的全髋关节置换金属承载表面的修订风险更高
3. Alumina-on-alumina ceramic versus metal-on-highly cross-linked polyethylene bearings in total hip arthroplasty: a comparative study. [J] . Bascarevic Z, Vukasinovic Z, Slavkovic N, International Orthopaedics . 2010,第8期

机译：全髋关节置换术中氧化铝对氧化铝陶瓷与高度交联金属聚乙烯轴承的比较研究。
4. Comparison of Uncemented Total Hip Arthroplasty between Metal on Metal and Ceramic on Polyethylene Bearing Surfaces in Young Patients [C] . Y.-H. Ki International BIOLOX Symposium . 2007

机译：在幼年患者中金属和陶瓷金属和陶瓷金属和陶瓷之间的未指向总髋关节置换术的比较
5. Multi-Objective Design Optimization of a Mobile-Bearing Total Disc Arthroplasty Considering Spinal Kinematics, Facet Joint Loads, and Metal-on-Polyethylene Contact Mechanics [D] . Zhou, Chaochao. 2018

机译：考虑到脊柱运动学，小关节负荷和金属与聚乙烯的接触力学的可移动轴承全椎间盘置换术的多目标设计优化
6. Metal-on-conventional Polyethylene Total Hip Arthroplasty Bearing Surfaces Have a Higher Risk of Revision Than Metal-on-highly Crosslinked Polyethylene: Results From a US Registry [O] . Elizabeth W. Paxton, Maria C. S. Inacio, Robert S. Namba, 2015

机译：常规金属上的全髋关节置换术与金属上高度交联的聚乙烯相比全髋关节置换轴承表面的修订风险更高：美国注册机构的结果
7. Distributed Analysis of Hip Implants Using Six National and Regional Registries: Comparing Metal-on-Metal with Metal-on-Highly Cross-Linked Polyethylene Bearings in Cementless Total Hip Arthroplasty in Young Patients [O] . Ove Furnes, Elizabeth Paxton, Guy Cafri, 2014

机译：使用六个国家和区域注册管理机构的髋关节植入物分布分析：将金属与金属在粘土总髋关节置换术中与金属对高度交联的聚乙烯轴承进行比较年轻患者

Risk of Revision Following Total Hip Arthroplasty: Metal-on-Conventional Polyethylene Compared with Metal-on-Highly Cross-Linked Polyethylene Bearing Surfaces

著录项

引文网络

相似文献

相关主题

期刊订阅