首页> 外文OA文献 >New Analytical Capacitance Modeling of the Perforated Switch Considering the Fringing Effect

【2h】

New Analytical Capacitance Modeling of the Perforated Switch Considering the Fringing Effect

机译：考虑流苏效应的穿孔开关新的分析电容建模

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
K. Srinivasa Rao; B. V. S. Sailaja; K. Girija Sravani; K. V. Vineetha; P. Ashok Kumar; D. Prathyusha; G. Sai Lakshmi; C. H. Gopi Chand; Koushik Guha;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. A modified capacitance model of RF MEMS shunt switch incorporatingn fringing field effects of perforated beam [J] . Guha Koushik, Kumar Mithlesh, Agarwal Saurabh, Solid-State Electronics . 2015,第DECa期

机译：带有穿孔梁边缘场效应的射频MEMS分流开关修正电容模型。
2. An Analytical Model for Fringing Capacitance in Double gate Hetero Tunnel FET and Analysis of effect of Traps and Oxide charges on Fringing Capacitance [J] . Brinda Bhowmick, Srimanta Baishya International Journal of VLSI Design & Communication Systems . 2012,第1期

机译：双栅极异质隧道FET的边缘电容分析模型以及陷阱和氧化物电荷对边缘电容的影响分析
3. Analytical modelling and simulation of negative capacitance junctionless FinFET considering fringing field effects [J] . Shelja Kaushal, Ashwani K. Rana Superlattices and microstructures . 2021,第Jula期

机译：考虑流苏现场效应的负电容连接FINFET的分析模拟与仿真
4. New analytical model of switching capacitance for MEMS shunt perforated switch [C] . Koushik Guha, Srimanta Baishya, Ananta Kumar Borah IEEE Nanotechnology Materials and Devices Conference . 2017

机译：MEMS并联穿孔开关的开关电容新分析模型
5. Analytical modeling and design of high efficiency fully-integrated switched-capacitor DC-DC converters and a high-voltage current regulator [D] . Veerabathini, Anurag. 2018

机译：高效全集成开关电容DC-DC转换器的分析建模与设计和高压电流调节器
6. Computer Simulation of Partial Discharges in Voids inside Epoxy Resins Using Three-Capacitance and Analytical Models [O] . Johnatan M. Rodríguez-Serna, Ricardo Albarracín-Sánchez, Ming Dong, 2020

机译：使用三电容和分析模型的环氧树脂内部空隙局部放电的计算机模拟
7. Correction to: Novel capacitance evaluation model for microelectromechanical switch considering fringe and effect of holes in pull-up and pull-down conditions [O] . Rajesh Kumar 2020

机译：校正：考虑孔隙和下拉条件孔的微机电开关新型电容评估模型
8. Analytical Modeling of Pressure Wall Hole Size and Maximum Tip-to-Tip Crack Length for Perforating Normal and Oblique Orbital Debris Impacts [R] . Schonberg, William P., Mohamed, Essam 1997

机译：爆破正常和斜向轨道碎片撞击的压力壁孔尺寸和最大尖端裂纹长度的解析模型

New Analytical Capacitance Modeling of the Perforated Switch Considering the Fringing Effect

著录项

引文网络

相似文献

相关主题

期刊订阅