首页> 外文OA文献 >Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel

【2h】

Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel

机译：在5 WT PCT CR冷工床钢的热处理期间保留奥氏体转化

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
M. Arbab Rehan; Anna Medvedeva; Lars-Erik Svensson; Leif Karlsson;
展开▼
作者单位

展开▼
年度 2017
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel [J] . Rehan M. Arbab, Medvedeva Anna, Svensson Lars-Erik, Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2017,第11期

机译：在5 WT PCT CR冷工床钢的热处理期间保留奥氏体转化
2. Reverse transformation mechanism of martensite to austenite and amount of retained austenite after reverse transformation in Fe-3Si- 13Cr-7Ni (wt- percent) martensitic stainless steel [J] . Y.-K. Lee, H.-C. Shin, D.-S. Leem Materials Science and Technology: MST: A publication of the Institute of Metals . 2003,第3期

机译：Fe-3Si-13Cr-7Ni（wt％）马氏体不锈钢中马氏体向奥氏体的反向转变机理和反向转变后的残余奥氏体量
3. Thermally Stable Ni-rich Austenite Formed Utilizing Multistep Intercritical Heat Treatment in a Low-Carbon 10 Wt Pct Ni Martensitic Steel [J] . Jain Divya, Isheim Dieter, Zhang Xian J., Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2017,第8期

机译：在低碳10 WT PCT Ni马氏体钢中利用多步体临界热处理形成热稳定的Ni富含奥氏体
4. The Use of Navy C-Ring Specimens to Investigate the Effects of Initial Microstructure and Heat Treatment on the Residual Stress, Retained Austenite, and Distortion of Carburized Automotive Steels [C] . Erin Boyle, Randy Bowers, Derek O. Northwood World Congress . 2007

机译：使用海军C形戒指试图探讨初始组织和热处理对残余应力，保留奥氏体和渗碳汽车钢变形的影响
5. Microstructural effects on the stability of retained austenite in Transformation Induced Plasticity steels. [D] . Mark, Alison Fiona Lockie. 2008

机译：显微组织对相变诱导塑性钢中残余奥氏体稳定性的影响。
6. Assessment of Retained Austenite in Fine Grained Inductive Heat Treated Spring Steel [O] . Anna Olina, Miroslav Píška, Martin Petrenec, 2019

机译：细晶粒感应热处理弹簧钢中残余奥氏体的评估
7. Tool Steels. Influence of the Stability of Retained Austenite on Elapsed Dimensional Change of 1C-8Cr Type Cold Work Die Steel Tempered at Higher Temperature. [O] . Yukinori Matsuda, Yoshiaki Sakamoto 2000

机译：工具钢。保留奥氏体稳定性对较高温度升温1C-8CR型冷轧机模钢经过尺寸变化的影响。

Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel

著录项

引文网络

相似文献

相关主题

期刊订阅