首页> 外文OA文献 >STUDY ON OPTIMIZATION OF BINDERS TO ACHIEVE HIGH STRENGTH CONCRETE WITH DESIGN STANDARD STRENGTH OF 300 N/MM2

【2h】

STUDY ON OPTIMIZATION OF BINDERS TO ACHIEVE HIGH STRENGTH CONCRETE WITH DESIGN STANDARD STRENGTH OF 300 N/MM2

机译：粘合剂优化实现高强度混凝土的设计标准强度为300N / mm 2

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Masaro KOJIMA; Daisuke HONMA; Daijiro TSUJI; Kazuhisa OKADA; Tomoyuki KOYAMA;
展开▼
作者单位

展开▼
年度 2021
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Studies on Compressive Strength Of Ternary Blended Concretes At Different Water Binder Ratios [J] . D.Audinarayana, P.sarika, Dr.Seshadri Sekhar.T, American Journal of Engineering Research . 2013,第9期

机译：三水混合比下三元混合混凝土的抗压强度研究
2. Comparative Study on Effect of Cooling Methods on Compressive Strength of Standard And High Strength Concrete Subjected To Real Fire [J] . Jagadeesh chenchala, V. Sowjanya Vani American Journal of Engineering Research . 2017,第12期

机译：冷却方法对标准和高强度混凝土真实火灾抗压强度影响的比较研究
3. Investigation of the structure of cement stone, obtaining and optimization of high-strength concrete on mechanically activated binder [J] . Liubov Ksonshkevych, Olena Krantovska, Mykola Petrov, MATEC Web of Conferences . 2018,第2期

机译：机械活化粘结剂研究水泥石结构，高强度混凝土的获得与优化
4. MIXTURE OPTIMIZATION OF AN ALKALI-ACTIVATED STEEL SLAG TO MAXIMIZE BINDER STRENGTH USING OPTIMAL DESIGN OF EXPERIMENTS [C] . Pavel Leonardo Lopez Gonzalez, Yiannis Pontikes International conference on alkali activated materials and geopolymers: versatile materials offering high performance and low emissions 2018 . 2018

机译：基于实验优化设计的碱活化钢渣的混合优化，以最大程度地提高结合强度
5. A study of the shear strength of early age and mature high strength concrete and normal strength concrete members. [D] . McFarland, Ausbra Elliot. 1997

机译：早期和成熟的高强度混凝土和普通强度混凝土构件的抗剪强度研究。
6. Optimization of Steam-Curing Regime for Recycled Aggregate Concrete Incorporating High Early Strength Cement—A Parametric Study [O] . Asad Hanif, Yongjae Kim, Muhammad Usman, 2018

机译：含高早强水泥的再生骨料混凝土蒸汽养护方案的优化-参数研究
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Strength Design of Reinforced Concrete Hydraulic Structures. Report 5. Experimental Study on the Ultimate Behavior of Model Reinforced Concrete Circular Conduits [R] . Wright, R. S., Chiarito, V. P. 1987

机译：钢筋混凝土水工结构的强度设计。报告5.模型钢筋混凝土圆形管道极限性能试验研究

STUDY ON OPTIMIZATION OF BINDERS TO ACHIEVE HIGH STRENGTH CONCRETE WITH DESIGN STANDARD STRENGTH OF 300 N/MM2

著录项

引文网络

相似文献

相关主题

期刊订阅