首页> 外文OA文献 >Processing and characterization of glass-ceramic foams belonging to the Li2O-ZrO2-Al2O3-SiO2 (LZSA) system produced by gelcasting
【2h】

Processing and characterization of glass-ceramic foams belonging to the Li2O-ZrO2-Al2O3-SiO2 (LZSA) system produced by gelcasting

机译:通过凝胶浇铸生产的属于Li2O-ZrO2-Al2O3-SiO2(LZSA)系统的玻璃陶瓷泡沫的加工和表征

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this work the viscosimetry technique was used to evaluate the rheological characteristics of ceramic suspensions prepared with a LZSA (Li2O-ZrO2-SiO2-Al2O3) glass. From the rheological characterization it was possible to establish optimized conditions of solid fraction, dispersant, organic monomers and foaming agent for the production of glass-ceramic foams by gelcasting. The resulting foams were subjected to heattreatments at 200-500ºC/60 min, for degradation of organics and at 950ºC/60 min for sintering and crystallization. With the obtained porous ceramic bodies linear thermal shrinkage, apparent density and mechanical strength measurements as well as microstructural analysis were performed. The adaptation of the rheological characteristics of the LZSA parent glass powder with the gelcasting processing technique allowed the production of ceramic foams with high open and interconnected porosity (>90%) with good thermal stability and with mechanical strength suitable for the production of porous ceramics.
机译:在这项工作中,使用粘度测定技术评估了用LZSA(Li2O-ZrO2-SiO2-Al2O3)玻璃制备的陶瓷悬浮液的流变特性。从流变学特征,可以建立用于通过凝胶浇铸生产玻璃陶瓷泡沫的固体部分,分散剂,有机单体和发泡剂的优化条件。所得的泡沫在200-500ºC/ 60分钟的条件下进行热处理,以降解有机物,在950ºC/ 60分钟的条件下进行烧结和结晶化。用获得的多孔陶瓷体进行线性热收缩,表观密度和机械强度测量以及微观结构分析。 LZSA母体玻璃粉的流变特性通过凝胶浇铸加工技术进行了调整,从而可以生产具有高开孔和互连孔隙率(> 90%)的陶瓷泡沫,并具有良好的热稳定性和机械强度,适用于生产多孔陶瓷。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号