首页> 外文OA文献 >On the Effect of Thin Film Growth Mechanisms on the Specular Reflectance of Aluminium Thin Films Deposited via Filtered Cathodic Vacuum Arc
【2h】

On the Effect of Thin Film Growth Mechanisms on the Specular Reflectance of Aluminium Thin Films Deposited via Filtered Cathodic Vacuum Arc

机译:薄膜生长机制对通过过滤的阴极真空弧沉积铝薄膜镜面反射率的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The optimisation of the specular reflectance of solar collectors is a key parameter to increase the global yield of concentrated solar power (CSP) plants. In this work, the influence of filtered cathodic vacuum arc deposition parameters, particularly working pressure and deposition time, on the specular and diffuse reflectance of aluminium thin films, was studied. Changes in specular reflectance, measured by ultraviolet–visible and near-infrared spectroscopy (UV-vis-NIR) spectrophotometry, were directly correlated with thin film elemental concentration depth profiles, obtained by Rutherford backscattering spectrometry (RBS), and surface and cross-sectional morphologies as measured by scanning electron microscopy (SEM) and profilometry. Finally, atomic force microscopy (AFM) provided information on the roughness and growth mechanism of the films. The two contributions to the total reflectance of the films, namely diffuse and specular reflectance, were found to be deeply influenced by deposition conditions. It was proven that working pressure and deposition time directly determine the predominant factor. Specular reflectance varied from 12 to 99.8% of the total reflectance for films grown at the same working pressure of 0.1 Pa and with different deposition times. This transformation could not be attributed to an oxidation of the films as stated by RBS, but was correlated with a progressive modification of the roughness, surface, and bulk morphology of the samples over the deposition time. Hence, the evolution in the final optical properties of the films is driven by different growth mechanisms and the resulting microstructures. In addition to the originally addressed CSP applications the potential of the developed aluminium films for other application rather than CSP, such as, for example, reference material for spectroscopic diffuse reflectance measurements, is also discussed.
机译:太阳能集热器的镜面反射率的优化是增加聚光太阳能发电(CSP)植物的总收率的关键参数。在这项工作中,过滤阴极真空电弧沉积参数,特别是工作压力和沉积时间,在镜面反射和铝薄膜的漫反射率的影响,进行了研究。在镜面反射率的变化,利用紫外可见和近红外光谱(UV-VIS-NIR)光谱法测定,直接用薄膜元素浓度的深度剖面,通过卢瑟福背散射能谱法(RBS)获得的,并且表面和横截面相关如通过扫描电子显微镜(SEM)和轮廓测量形貌。最后,原子力显微镜(AFM)设置在所述膜的粗糙度和生长机制的信息。于膜,即漫反射和镜面反射的总反射率的两个贡献,发现由沉积条件来深深影响。它证明,工作压力和沉积时间直接决定的主要因素。镜面反射率变化从12到用于在0.1Pa的同一工作压力下生长膜中的总反射率的99.8%,并用不同的沉积时间。如由RBS说明,但与样品随沉积时间的粗糙度,表面和散装形态的逐行修改呈正相关这一转变不能归因于膜的氧化。因此,在该薄膜的最终光学特性的演变是由不同的生长机制,将所得微结构驱动。除了最初寻址的CSP的应用程序的开发的铝膜用于其他应用,而不是CSP,诸如,例如,参考材料的光谱漫反射测量的电位,进行了讨论。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号