首页> 外文OA文献 >Hardness and wear behaviour of TiC-Al/Si composite coatings made by laser cladding onto AL substrate

【2h】

Hardness and wear behaviour of TiC-Al/Si composite coatings made by laser cladding onto AL substrate

机译：通过激光熔覆在Al底物上制备TiC-Al / Si复合涂层的硬度和磨损行为

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

Peer reviewed: No

机译：同行评审：没有

著录项

作者
L. Dubourg; F. Hlawka; A. Cornet;
展开▼
作者单位

展开▼
年度 2004
总页数
原文格式 PDF
正文语种 eng
中图分类

相似文献

外文文献
中文文献
专利

1. Comparison of the Microstructure Evolution and Wear Resistance of Ti6Al4V Composite Coatings Reinforced by Hard Pure or Ni-plated Cubic Boron Nitride Particles Prepared with Laser Cladding on a Ti6Al4V Substrate [J] . Shuren Fu, Lijing Yang, Pei Wang, Coatings . 2020,第7期

机译：用激光覆层在Ti6Al4V基板上制备的硬纯或镍立方硼氮化物颗粒增强Ti6Al4V复合涂层的微观结构演化和耐磨性
2. High-temperature slide wear of Ni-Cr-Si metal silicide based composite coatings on copper substrate by laser-induction hybrid cladding [J] . Yin Jie, Wang DengZhi, Meng Li, Surface & Coatings Technology . 2017,第期

机译：激光诱导杂交包层铜基材上镍基硅化物硅化物硅化物复合涂层的高温滑梯
3. Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding [J] . Liu Hao, Liu Jian, Chen Peijian, Optics & Laser Technology . 2019,第期

机译：激光熔覆制造的原位TIC钢筋基础高熵合金复合涂层的微观结构和高温磨损行为
4. HARDNESS AND WEAR BEHAVIOUR OF TIC-AL/SI COMPOSITE COATINGS MADE BY LASER CLADDING ONTO AL SUBSTRATE [C] . L. Dubourg, F. Hlawka, A. Cornet Laser materials processing conference . 2004

机译：激光熔覆Al基体制成的TIC-AL / SI复合涂层的硬度和磨损性能
5. The impact of coating architecture on the hardness, friction and wear resistance of hard and tribological nanocomposite coatings. [D] . Endrino, Jose Luis. 2003

机译：涂层结构对硬和摩擦纳米复合涂层的硬度，摩擦和耐磨性的影响。
6. Computational and Experimental Investigation of Micro-Hardness and Wear Resistance of Ni-Based Alloy and TiC Composite Coating Obtained by Laser Cladding [O] . Guofu Lian, Hao Zhang, Yang Zhang, 2019

机译：激光熔覆获得的镍基合金和TiC复合涂层的显微硬度和耐磨性的计算和实验研究
7. Comparison of the Microstructure Evolution and Wear Resistance of Ti6Al4V Composite Coatings Reinforced by Hard Pure or Ni-plated Cubic Boron Nitride Particles Prepared with Laser Cladding on a Ti6Al4V Substrate [O] . Shuren Fu, Lijing Yang, Pei Wang, 2020

机译：用激光覆层在Ti6Al4V基板上制备的硬纯或镍立方硼氮化物颗粒增强Ti6Al4V复合涂层的微观结构演化和耐磨性

Hardness and wear behaviour of TiC-Al/Si composite coatings made by laser cladding onto AL substrate

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅