首页> 外文OA文献 >FINITE ELEMENT MODELING OF TEMPERATURE FIELDS ON THE CUTTING EDGE IN THE DRY HIGH-SPEED TURNING OF AISI 1045 STEEL

【2h】

FINITE ELEMENT MODELING OF TEMPERATURE FIELDS ON THE CUTTING EDGE IN THE DRY HIGH-SPEED TURNING OF AISI 1045 STEEL

机译：AISI 1045钢干高速转向切削刃温度场的有限元建模

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Roberto Pérez; Luis Hernández; Ana Quesada; Julio Pino; Enrique Zayas;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. 高频交变磁场作用下AISI 1045钢快速加热过程奥氏体相变的动力学建模 [J] . 高恺, 郭健忠, 秦训鹏中南大学学报（英文版） . 2020,第005期
2. Finite element investigation of friction and wear of microgrooved cutting tool in dry machining of AISI 1045 steel [J] . Ma Jianfeng, Duong Nick H., Lei Shuting Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology . 2015,第4期

机译：微槽切削刀具在AISI 1045钢干式加工中的摩擦磨损的有限元研究
3. FINITE ELEMENT ANALYSIS OF ORTHOGONAL CUTTING OF AISI 1045 STEEL UNDER DRY AND CRYOGENIC CONDITION [J] . Dhananchezian M., Karthikeyan K. V., Pradeep Kumar M. MTT: Manufacturing Technology Today . 2009,第2期

机译：低温和低温条件下AISI 1045钢正交切削的有限元分析
4. An Investigation into the Effect of Three-flow Stress Models on the Finite Element Simulation of Orthogonal Cutting of AISI 1045 Steel [J] . K. S. Vijay Sekar, M. Pradeep Kumar Journal of the Institution of Engineers (India) . 2009,第2期

机译：三流应力模型对AISI 1045钢正交切削有限元模拟影响的研究
5. Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel [C] . S. Sulaiman, M. K. A. Ariffin, A. Roshan International Conference on Advanced Materials and Processing Technologies . 2014

机译：AISI 1045钢材高速加工过程中工具耙角效果的有限元模型
6. Finite Element Studies of Orthogonal Machining of Aisi 1045 Steel [D] . Thekdi, Parth N. 2019

机译：Aisi 1045钢的正交加工有限元研究
7. Data-set collected during turning operation of AISI 1045 alloy steel with green cutting fluids in near dry condition [O] . Milon Selvam Dennison, Abisha Meji M, Malik Mohamed Umar 2020

机译：在AISI 1045合金钢的转动操作期间收集数据集在近干燥条件下的绿色切削液
8. EFFECT OF CUTTING SPEED IN THE TURNING PROCESS OF AISI 1045 STEEL ON CUTTING FORCE AND BUILT-UP EDGE (BUE) CHARACTERISTICS OF CARBIDE CUTTING TOOL [O] . Sobron Yamin Lubis, Sofyan Djamil, Yehezkiel Kurniawan Zebua 2020

机译：碳化物切削工具切割力和建筑边缘（BUE）钢化件钢筋混凝加工速度的影响
9. Modeling of the Temperature Field in the Chip and in the Tool in High-Speed Machining of a Carbon Steel: Effect of Pearlite to Austenite Phase Transition in AISI 1075 [R] . Burns, T. J., Mates, S. P., Rhorer, R. L., 2010

机译：碳钢高速加工中芯片和刀具温度场的建模：aIsI 1075中珠光体对奥氏体相变的影响

FINITE ELEMENT MODELING OF TEMPERATURE FIELDS ON THE CUTTING EDGE IN THE DRY HIGH-SPEED TURNING OF AISI 1045 STEEL

著录项

引文网络

相似文献

相关主题

期刊订阅