首页> 外文OA文献 >Table 1: Comparisons of “α” and “β” angle of simulated screw trajectory from the CAD software and the “α1” and “β1” angle of screw trajectory from radiographic films of 3D-printed model.

【2h】

Table 1: Comparisons of “α” and “β” angle of simulated screw trajectory from the CAD software and the “α1” and “β1” angle of screw trajectory from radiographic films of 3D-printed model.

机译：表1：从CAD软件和“α1”和“α1”和“α1”和“α1”和“β1”角度的“α”和“β”角度与3D印刷模型的螺钉轨迹的“α1”和“β1”角度的比较。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者

展开▼
作者单位

展开▼
年度 -1
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Cortical bone trajectory screws used to save failed traditional trajectory screws in the osteoporotic lumbar spine and vice versa: a human cadaveric biomechanical study [J] . Zhang Ren-Jie, Li Hui-Min, Gao Hai, Journal of Neurosurgery. Spine. . 2019,第6期

机译：用于保存失败的传统轨迹螺钉的皮质骨轨迹螺钉，骨质疏松腰椎脊柱，反之亦然：人类尸体生物力学研究
2. Biomechanical comparison of anatomic trajectory pedicle screw versus injectable calcium sulfate graft-augmented pedicle screw for salvage in cadaveric thoracic bone. [J] . Derincek A, Wu C, Mehbod A, Journal of spinal disorders & techniques. . 2006,第4期

机译：解剖轨迹椎弓根螺钉与可注射硫酸钙移植物增强椎弓根螺钉在尸体胸骨中的抢救的生物力学比较。
3. Double-trajectory lumbar screw placement guided by a set of 3D-printed surgical guide templates: a cadaver study [J] . Yonghui Zhao, Jinlong Liang, Haotian Luo, BMC Musculoskeletal Disorders . 2021,第1期

机译：双轨腰螺钉放置一套3D印刷的外科手术指南模板：尸体研究
4. BIOMECHANICAL COMPARISON OF TWO ATLANTOAXIAL ARTHRODESES IN A CADAVERIC SPINE MODEL - TRANSARTICULAR SCREW FIXATION VERSUS SCREW AND ROD FIXATION - [C] . ASME internatioanl mechanical engineering congress and exposition . 2003

机译：尸体脊柱模型中两种寰枢膜关节的生物力学比较 - 间隙螺钉固定与螺杆固定 -
5. Minimum audible movement angles for discriminating upward from downward trajectories of smooth virtual source motion within a sagittal plane. [D] . Benson, David H. 2008

机译：用于在弧矢平面内与平滑虚拟源运动的向下轨迹向上区分的最小听觉移动角度。
6. Response to Is the Greater Trochanter the Ideal Freehand Landmark for the S2AI Screw Angle in the Caudal Direction? Commentary on ‘Extra-Articular Portion of the Sacroiliac Joint—Between the Sacral and Pelvic Tuberosities: An Anatomical Guide for the S2-Alar-Iliac Screw Trajectory’ by Tatara et al [O] . Yasunori Tatara, Takanori Niimura, Tatsuhiro Sekiya, 2021

机译：回应是尾部S2AI螺钉角度的更大的拖把的理想写意界面？对骶骨和盆腔结合之间的骶髂关节关节部分的评注：Tatara等人的S2-Alar-Iliac螺旋轨迹的解剖指南
7. Figure 1: The optimal TPTD screw trajectory was simulated in CAD software, as placed at the central axis of pedicle (latero-median direction) and maximum upward tilt (antero-dorsal direction) while remaining within the pedicle. [O] . -1

机译：图1：在CAD软件中模拟了最佳TPTD螺杆轨迹，如放置在椎弓根（后位方向）的中心轴上，并且在椎弓根内留下的最大向上倾斜（绕线 - 背向）。

Table 1: Comparisons of “α” and “β” angle of simulated screw trajectory from the CAD software and the “α1” and “β1” angle of screw trajectory from radiographic films of 3D-printed model.

著录项

引文网络

相似文献

相关主题

期刊订阅