首页> 外文OA文献 >Hot Spline Forming of Ultra High Strength Steel Gear DrumUsing Resistance Heating

【2h】

Hot Spline Forming of Ultra High Strength Steel Gear DrumUsing Resistance Heating

机译：超高强度钢齿轮鼓起耐热加热的热花样形成

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Tomoyoshi MAENO; Ken-ichiro MORI; Yuji FUKUI; Kanji UENO; Kazumi SAITO; Yasuji HOKAZONO; Yoshifumi ANADA;
展开▼
作者单位

展开▼
年度 2011
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Spline forming of ultra-high strength gear drum using resistance heating of side wall of cup [J] . K. Mori, T. Maeno, Y. Fukui CIRP Annals . 2011,第1期

机译：利用杯体侧壁的电阻加热花键成型超高强度齿轮鼓
2. 1-Shot hot stamping of ultra-high strength steel parts consisting of resistance heating, forming, shearing and die quenching [J] . Mori Ken-ichiro, Maeno Tomoyoshi, Yamada Hiroaki, International Journal of Machine Tools & Manufacture: Design, research and application . 2015,第Null期

机译：通过电阻加热，成型，剪切和模具淬火组成的超高强度钢零件的1-Shot热冲压
3. Gas forming of ultra-high strength steel hollow part using air filled into sealed tube and resistance heating [J] . T. Maeno, K. Mori, K. Adachi Journal of Materials Processing Technology . 2014,第1期

机译：通过将空气填充到密封管中并进行电阻加热来对超高强度钢空心零件进行气体成型
4. Hot Spline Forming of Ultra-High Strength Steel Gear Drum Using Resistance Heating [C] . Ken-ichiro Mori, Tomoyoshi Maeno, Shohei Nakamoto International Conference on Metal Forming . 2014

机译：使用电阻加热的超高强度钢齿轮的热花样形成
5. Performance optimization and computational design of ultra-high strength gear steels. [D] . Tiemens, Benjamin Lee. 2006

机译：超高强度齿轮钢的性能优化和计算设计。
6. Hot-Rolling and a Subsequent Direct-Quenching Process Enable Superior High-Cycle Fatigue Resistance in Ultra-High Strength Low Alloy Steels [O] . Min-Seok Baek, Young-Kyun Kim, Tae-Won Park, 2020

机译：热轧和随后的直接淬火过程使超高强度低合金钢中的卓越的高循环疲劳性能实现
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

Hot Spline Forming of Ultra High Strength Steel Gear DrumUsing Resistance Heating

著录项

引文网络

相似文献

相关主题

期刊订阅