首页> 外文OA文献 >PEMANFAATAN ASAP CAIR KAYU PINUS (Pinus merkusii Jungh. de Vriese) SEBAGAI KOAGULAN GETAH KARET
【2h】

PEMANFAATAN ASAP CAIR KAYU PINUS (Pinus merkusii Jungh. de Vriese) SEBAGAI KOAGULAN GETAH KARET

机译:优质液体烟雾的利用(Pine Merkusii Jungh.&de Vriese)作为凝血剂橡胶液

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Smoke liquid is a liquid obtained from smoke condensation during charcoal firing process. The main content of the smoke liquid is acetic acid, hence, can be used as an alternative latex coagulant. Acid in vinegar can reduce the pH of latex and  cause the latex to coagulate rapidly. This paper determines effectiveness of using  smoke liquid as a latex coagulant and characteristics of the treated latex. The smoke liquid  in this study was derived from pine wood. The smoke liquid solutions consisted of  the crude smoke liquid and the diluted solution in various concentrations of 5, 10, 15 and 20%. The smoke liquid solution was then each poured into a container of  latex. Testing was undergone by observing latex coagulating time, coagulate condition, texture, color, odor and homogenity. The most effective smoke liquid which produced the best latex based on its performances was then taken for further testing of physico-chemical properties which included dry rubber content, plasticity retention index (PRI), initial plasticity (Po), final plasticity (Pa), dirt content, ash content, volatile matter content (Vm), and nitrogen content. Results were then compared with the conventional use of formic acid as a control coagulant. The result showed that the crude and distillate smoke liquid solutions with concentration of  10% produced the best coagulantperformances than the other solutions. Rubber latex treated with the crude smoke liquid produced the best physico-chemical properties and could meet requirements of the Indonesian National Standard (SNI) for Rubber Quality.
机译:烟液是在木炭烧制过程从烟雾缩合获得的液体。烟液的主要内容是乙酸,因此,可以被用作一个替代胶乳凝结剂。酸醋可以减少乳胶的pH值,使胶乳凝固迅速。本文使用确定烟雾液体作为胶乳凝结剂和处理过的乳胶的特性的效果。在这项研究中烟液体从松木的。烟液溶液由粗烟液和各种浓度的5,10,15和20%的稀释的溶液。烟液溶液然后每个倒入胶乳的容器中。测试是通过观察乳胶凝结时间,凝结条件,质地,颜色,气味和均一发生。然后产生基于其性能最好胶乳最有效的烟液取为其中包括干橡胶含量,可塑性保留指数(PRI),初始可塑性(PO),最终塑性(Pa)的物理化学性质的进一步测试,污垢含量,灰分含量,挥发物含量(VM),和氮含量。结果然后与常规使用甲酸作为控制凝结剂进行比较。结果表明,粗,并用浓度为10%馏出烟雾液体溶液产生了比其它解决方案的最佳coagulantperformances。与粗烟液处理过的橡胶胶乳中产生的最好的物理 - 化学特性和能够满足印度尼西亚国家标准(SNI)对于橡胶的质量的要求。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号