首页> 外文OA文献 >Sub-zero Treatment of Quenched Steel (1st Report). On the Effect of the Quenching Temperature and Room Temperature Aging on Sub-zero Treatment of Quenched Steel

【2h】

Sub-zero Treatment of Quenched Steel (1st Report). On the Effect of the Quenching Temperature and Room Temperature Aging on Sub-zero Treatment of Quenched Steel

机译：淬火钢的次零处理（第1报告）。淬火温度和室温老化对淬火钢次零处理的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Yucirc; noshin Imai; Masao Izumiyama;
展开▼
作者单位

展开▼
年度 1955
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Coercive-Force and Eddy-Current Testing of the Abrasive Wear Resistance of Quenched and Tempered Hypereutectoid Carbon Steels: II. Steels Subjected to Different Quenching Regimes, Subzero Treatment, and Tempering after High-Temperature Quenching [J] . A. V. Makarov, E. S. Gorkunov, L. Kh. Kogan Russian Journal of Nondestructive Testing . 2007,第5期

机译：淬火和回火超共析碳素钢的耐磨性的强制和涡流测试：II。钢材经受不同的淬火方式，零以下处理和高温淬火后的回火
2. Changes in microstructure of ledeburitic tool steel due to vacuum austenitizing and quenching, sub-zero treatments at-140 degrees C and tempering [J] . Durica Juraj, Ptacinova Jana, Domankova Maria, Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology . 2019,第期

机译：由于真空奥氏体淬火和淬火而导致的Ledeburitic工具钢的微观结构变化，次零处理 - 140℃和回火
3. Characterization of microstructure and tempering response of conventionally quenched, short- and long-time sub-zero treated PM Vanadis 6 ledeburitic tool steel [J] . Peter Jur?i, Mária Dománková, Mária Hudáková, Materials Characterization . 2017,第期

机译：常规淬火的微观结构和回火响应的表征，短期和长时间零治疗PM vANADIS 6 LADEBERITIC工具钢
4. The Effects of Steel Quality, Vacuum Heat Treatment Quench Rate and Charpy V-Notch Impact Test Temperature on the Impact Toughness and Microstructure of Premium Quality H-13 Tool Steel [C] . Guy Brada International Die Casting Congress and Exposition . 2001

机译：钢质，真空热处理淬火率和夏比V-Novth抗冲击试验温度对高质量H-13工具钢的影响韧性和微观结构
5. The effect of surface condition and high -temperature oxidation on quenching performance of 4140 steel in mineral oil [D] . Chaves, Juan C. 2001

机译：表面条件和高温氧化对矿物油中4140钢淬火性能的影响
6. Temperature Field Numerical Analysis Mode and Verification of Quenching Heat Treatment Using Carbon Steel in Rotating Laser Scanning [O] . Tsung-Pin Hung, Chao-Ming Hsu, Hsiu-An Tsai, 2019

机译：旋转激光扫描碳钢淬火热处理的温度场数值分析模式及验证
7. Stabilization of Austenite-Martensite Transformation. (Sub-Zero Treatment of Quenched Steel (5th Report)) [O] . Yucirc, noshin Imai, Masao Izumiyama 1959

机译：稳定化奥氏体 - 马氏体转化。（淬火钢的零处理（第5次报告））
8. Heat Treatment of High-Strength Steels through Control of Quenching Temperature [R] . Arnold, S. V. 1961

机译：淬火温度控制高强度钢的热处理

Sub-zero Treatment of Quenched Steel (1st Report). On the Effect of the Quenching Temperature and Room Temperature Aging on Sub-zero Treatment of Quenched Steel

著录项

引文网络

相似文献

相关主题

期刊订阅