首页> 外文OA文献 >Accuracy and wear resistance of the small injection-molded plastic gears. For high-strength and heat-resistance plastics filled with fiber or carbon.

【2h】

Accuracy and wear resistance of the small injection-molded plastic gears. For high-strength and heat-resistance plastics filled with fiber or carbon.

机译：小注塑塑料齿轮的精度和耐磨性。用于填充纤维或碳的高强度和耐热塑料。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Shigetada TANAKA; Satoru EZOE; Yohichi FUJIOKA; Kiyoshi MORIMOTO;
展开▼
作者单位

展开▼
年度 1990
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effect of the Heat Treatment and Plastic Deformation of High-Strength Corrosion-Resistant Nitrogen-Bearing Steels on Their Wear Resistance during Sliding Friction [J] . V. M. Blinov, O. A. Bannykh, M. V. Kostina Russian Metallurgy(Metally) . 2007,第6期

机译：高强度耐腐蚀含氮钢的热处理和塑性变形对其滑动摩擦性能的影响
2. Impact wear properties of metal-plastic multilayer composites filled with glass fiber treated with rare earth element surface modifier [J] . Cheng Xian-hua, Xue Yu-jun Journal of rare earths . 2001,第3期

机译：稀土元素表面改性剂处理的玻璃纤维填充金属塑料多层复合材料的冲击磨损性能
3. Impact wear properties of metal-plastic multilayer composites filled with glass fiber treated with rare earth element surface modifier [J] . Cheng Xian-hua, Xue Yu-jun Journal of rare earths . 2001,第3期

机译：稀土元素表面改性剂处理的玻璃纤维填充金属塑料多层复合材料的冲击磨损性能
4. Adhesiveness evaluation of heat-resistance thermosetting imide molding plastic for SiC power device package with power cycling test [C] . Akihiro Yasui, Tsuyoshi Funaki, Takuo Sugioka, Electronic System-Integration Technology Conference . 2016

机译：用功率循环试验评估用于SiC功率器件封装的耐热性热固性酰亚胺模塑塑料的粘合性
5. An analytical and experimental investigation of concrete-filled fiber-reinforced plastics (FRP) tubes. [D] . Samaan, Michel Sabri. 1997

机译：填充混凝土的纤维增强塑料（FRP）管的分析和实验研究。
6. Wearable Wrist Movement Monitoring Using Dual Surface-Treated Plastic Optical Fibers [O] . Jing Li, Jian Liu, Cheng Li, 2020

机译：可穿戴手腕运动监控使用双面处理塑料光纤
7. Accuracy and Wear Resistance of Small Injection-Molded Plastic Gears. For High-Strength and Heat-Resistant Plastics filled with Fiber or Carbon. [O] . Shigetada TANAKA, Satoru EZOE, Yohichi FUJIOKA, 1991

机译：小注塑塑料齿轮的精度和耐磨性。用于填充纤维或碳的高强度和耐热塑料。
8. Aircraft Engine Driven Accessory Shaft Coupling Improvements Using High-Strength,Low Wear Polyimide Plastic. [R] . loker, aleck 1976

机译：使用高强度，低磨损聚酰亚胺塑料改进飞机发动机驱动附件轴联轴器。

Accuracy and wear resistance of the small injection-molded plastic gears. For high-strength and heat-resistance plastics filled with fiber or carbon.

著录项

引文网络

相似文献

相关主题

期刊订阅