首页> 外文OA文献 >Effect of Hardness and Stress Ratio on Threshold Stress Intensity Factor Ranges for Small Cracks and Long Cracks in Spheroidal Cast Irons

【2h】

Effect of Hardness and Stress Ratio on Threshold Stress Intensity Factor Ranges for Small Cracks and Long Cracks in Spheroidal Cast Irons

机译：硬度和应力比对阈值应力强度因子的影响小裂缝和球形铸铁长裂缝的范围

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Junichiro YAMABE; Motokazu KOBAYASHI;
展开▼
作者单位

展开▼
年度 2005
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Threshold stress intensity factor and crack growth rate for stress corrosion cracking of simulated heat affected zone in caustic solution [J] . Sarvesh Pal, R.N. Ibrahim, R.K. Singh Raman Engineering Fracture Mechanics . 2011,第1期

机译：苛性溶液中模拟热影响区应力腐蚀开裂的阈值应力强度因子和裂纹扩展速率
2. Validity of a new fracture mechanics technique for the determination of the threshold stress intensity factor for stress corrosion cracking (K_(Iscc)) and crack growth rate of engineering materials [J] . R.N. Ibrahim, R. Rihan, R.K. Singh Raman Engineering Fracture Mechanics . 2008,第6期

机译：确定应力腐蚀开裂的阈值应力强度因子（K_（Iscc））和工程材料的裂纹增长率的断裂力学新技术的有效性
3. Stress intensity factors for a wide range of long-deep semi-elliptical surface cracks, partly through-wall cracks and fully through-wall cracks in tubular members [J] . K. P. Kou, F. M. Burdekin Engineering Fracture Mechanics . 2006,第12期

机译：应力强度因数，适用于管状构件中各种深长的半椭圆形表面裂纹，部分贯穿壁裂纹和完全贯穿壁裂纹
4. MEASUREMENT OF MODE II THRESHOLD STRESS INTENSITY FACTOR RANGE ΔK_(IIth) FOR VARIOUS STEELS AND THE THRESHOLD CONDITION OF BIAXIAL FATIGUE CRACK GROWTH [C] . Y. Murakami International fatigue congress . 1999

机译：各种钢的II型门槛应力强度因子范围ΔK_（IIth）的测量以及双轴疲劳裂纹扩展的门槛条件
5. Effect of Residual Stresses on the Stress Intensity Factors for Cracks Near Fillet Welds. [D] . Du, Changyuan. 2015

机译：残余应力对角焊缝附近裂纹应力强度因子的影响。
6. Effect of Specimen Thickness and Stress Intensity Factor Range on Plasticity-Induced Fatigue Crack Closure in A7075-T6 Alloy [O] . Kenichi Masuda, Sotomi Ishihara, Noriyasu Oguma 2021

机译：试样厚度和应力强度因子范围对A7075-T6合金塑性诱导疲劳裂纹闭合的影响
7. Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images [O] . Limodin, Nathalie, Réthoré, Julien, Buffière, Jean-Yves, 2009

机译：利用实验室X射线显微断层图像的三维相关性测量球墨铸铁中的裂纹闭合和应力强度因子
8. Factors Influencing Threshold Stress,Intensity Values and Crack Propagation Rates During Stress Corrosion Cracking Tests of High Strength Steels. [R] . priest, a. h. mcintyre, p. 1972

机译：影响高强度钢应力腐蚀开裂试验中阈值应力，强度值和裂纹扩展速率的因素。

Effect of Hardness and Stress Ratio on Threshold Stress Intensity Factor Ranges for Small Cracks and Long Cracks in Spheroidal Cast Irons

著录项

引文网络

相似文献

相关主题

期刊订阅