首页> 外文OA文献 >A Study on the Bending Rigidity of an Adhesive Joint Subjected to a Bending Load Tangential to Bonding Surfaces.

【2h】

A Study on the Bending Rigidity of an Adhesive Joint Subjected to a Bending Load Tangential to Bonding Surfaces.

机译：弯曲载荷与粘合表面弯曲粘合接头弯曲刚度的研究。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Takashi KOBAYASHI; Tsuneo MATSUBAYASHI;
展开▼
作者单位

展开▼
年度 1991
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Numerical analysis on load-bearing capacity and damage of double scarf adhesive joints subjected to combined loadings of tension and bending [J] . Lijuan Liao, Toshiyuki Sawa, Chenguang Huang International Journal of Adhesion & Adhesives . 2014,第Null期

机译：拉伸和弯曲共同作用下双丝巾粘结点承载能力和破坏的数值分析
2. Degree of bending (DoB) in tubular K-joints of offshore structures subjected to in-plane bending (IPB) loads: Study of geometrical effects and parametric formulation [J] . Ahmadi Hamid, Lotfollahi-Yaghin Mohammad Ali, Asoodeh Shadi Ocean Engineering . 2015,第jula1期

机译：承受平面内弯曲（IPB）载荷的海上结构的管状K型接头的弯曲度（DoB）：几何效应和参数公式的研究
3. Effects of geometrical parameters on the degree of bending (DoB) in two-planar tubular DT-joints of offshore jacket structures subjected to axial and bending loads [J] . Ahmadi Hamid, Niaki Masoud Amini Marine Structures . 2019,第MARa期

机译：几何参数对承受轴向和弯曲载荷的海上夹层结构两平面管状DT接头弯曲程度（DoB）的影响
4. On the flexural rigidity of structural adhesive-aided joint in steel-estimation based on the three-point bending test and calculation [C] . Tsugihiko Satoh, Hiroshi Abe, Yoshiaki Sakata SAE International Congress and Exposition . 1996

机译：基于三点弯曲试验和计算的钢估计结构粘附接头的弯曲刚度
5. Buckling failure in adhesive joints under bending loads. [D] . Al-Qazzaz, Khaled. 2003

机译：弯曲载荷下粘合接头的屈曲失效。
6. Stress Concentration Factors for Welded Plate T-Joints Subjected to Tensile Bending and Shearing Loads [O] . Krzysztof L. Molski, Piotr Tarasiuk 2021

机译：用于焊接弯曲和剪切载荷的焊接板T关节应力集中因子
7. A study on the bending rigidity of adhesive joints. The case of adhesive lap joints subjected to a lateral bending load. [O] . Takashi KOBAYASHI, Tsuneo MATSUBAYASHI 1990

机译：粘合剂弯曲刚度研究。对横向弯曲载荷进行粘合圈接头的情况。
8. Evaluation of Several Bonding Parameters on the Random Bending Fatigue Life of Adhesively Bonded Aluminum Joints [R] . Wolfe, H. F., Rupert, C. L., Schwartz, H. S. 1981

机译：几种粘接参数对粘接铝接头随机弯曲疲劳寿命的评估

A Study on the Bending Rigidity of an Adhesive Joint Subjected to a Bending Load Tangential to Bonding Surfaces.

著录项

引文网络

相似文献

相关主题

期刊订阅