The potential distribution of windings under impulse voltage is very important for the design of transformer inter-turn insulation especially for large capacity transformers such as ultra-high voltage direct current (UHVDC) converter transformer. Quite a lot of equivalent circuit models for transformer winding have been proposed for the potential distribution calculation assuming that the influence of magnetic core is negligible at frequencies higher than 10 kHz. However, lightning impulse or VFTO waveforms usually contain abundant frequency components higher than 10 kHz. At above situations the magnetic core plays an important role during the transient procedure. To obtain a more comprehensive model and also to provide a more accurate potential distribution of transformer winding, in this paper, a wide frequency magnetic properties of silicon steel sheet were measured and the relationship between relative permeability of lamination stack and frequency is studied and implemented in the calculation of frequency-dependent parameters such as resistance, self- and mutual-inductances. Then the equivalent circuit model of UHVDC converter transformer is established considering the properties of core lamination stack. Coding the program in MATLAB to solve the matrix equation and the potential distribution properties are extracted from the calculation results under lightning situation. The inter-turn potential distribution is also analyzed and the results may provide more accurate information for transformer inter-turn insulation design.
展开▼
