Grinding of the Hob with Special Tooth Profile Using NC Dresser

机译：使用NC梳妆台用特殊的牙齿轮廓研磨炉灶

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Masato AINOURA; Yasuaki HIROO; Masataka YONEKURA; Tetsuro KAWANO; Hiroki NANRI; Katsuyuki NAKASHIMA;
展开▼
作者单位

展开▼
年度 1984
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Design method for profile of screw rotor hob in consideration of interference (3rd report, method to obtain profile of a cutting edge of hob which is ground by a given profiled relief grinding wheel) [J] . Yoshitaro Yoshida, Muneharu Morozumi, Satoshi Kishi 日本機械学会論文集. C編 . 1997,第611期

机译：考虑到干扰的螺杆转子滚刀轮廓的设计方法（第三次报告，获得滚刀切削刃轮廓的方法，该滚刀的切削刃由给定的异形砂轮磨削）
2. A Study of Relief Grinding Method for Screw Rotor Hob with Pencil Type Wheel (1st Report, Profile Design Method of Pencil Type Grinding Wheel) [J] . Tomio Horiuchi, Satoshi Kishi, Muneharu morozumi 日本機械学会論文集. C編 . 2001,第658期

机译：铅笔式砂轮螺杆转子滚刀的浮雕磨削方法研究（报告，铅笔式砂轮齿形设计方法）
3. A Study of Relief Grinding Method for Screw Rotor Hob with Pencil Type Wheel (1st Report, Profile Design Method of Pencil Type Grinding Wheel) [J] . Tomio Horiuchi, Satoshi Kishi, Muneharu morozumi 日本機械学会論文集. C編 . 2001,第658期

机译：铅笔式砂轮螺杆转子滚刀的浮雕磨削方法研究（报告，铅笔式砂轮轮廓设计方法）
4. Manufacturing of Cycloid Tooth Profile for RV and Cyclo Drives by Threaded Wheel Hobbing and Grinding [C] . Ling-Chiao Chang, Shyi-Jeng Tsai, Jia-Sheng Wei International Conference on Machining, Materials and Mechanical Technologies . 2019

机译：用螺纹轮滚动和研磨制造RV和Cyclo驱动的摆线齿型材
5. Development of tooth contact and mechanical efficiency models for face-milled and face-hobbed hypoid and spiral bevel gears. [D] . Kolivand, Mohsen. 2009

机译：铣削和滚齿双曲面和螺旋锥齿轮的齿接触和机械效率模型的开发。
6. On The Influence of Rotary Dresser Geometry on Wear Evolution and Grinding Process [O] . Leire Godino, Jorge Alvarez, Arkaitz Muñoz, 2019

机译：旋转修整器几何形状对磨损演变和磨削过程的影响
7. Improvement of gear accuracy in hobbing. (4th Report, An improvement of the tooth profile error of a hobbed gear by adjusting the hob eccentricity). [O] . Hua CHIU, Yoji UMEZAKl, Yasutsune ARIURA 1988

机译：滚动齿轮准确性的提高。（第4次报告，通过调节滚轴偏心来改善呼吸齿轮的牙齿轮廓误差。
8. Influence of tooth profile modification on spur gear dynamic tooth strain [R] . Oswald, Fred B., Townsend, Dennis P. 1995

机译：齿廓修形对直齿轮动态齿应变的影响

Grinding of the Hob with Special Tooth Profile Using NC Dresser

著录项

引文网络

相似文献

相关主题

期刊订阅