首页> 外文OA文献 >Determining the Compression-Equivalent Deformation of SBR-Based Rubber Material Measured in Tensile Mode Using the Finite Element Method

【2h】

Determining the Compression-Equivalent Deformation of SBR-Based Rubber Material Measured in Tensile Mode Using the Finite Element Method

机译：使用有限元方法确定在拉伸模式下测量的基于SBR的橡胶材料的压缩等效变形

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Sahbi Aloui; Mohammed El Yaagoubi;
展开▼
作者单位

展开▼
年度 2021
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. On the performance of enhanced strain finite elements in large strain deformations of elastic shells: Comparison of two classes of constitutive models for rubber materials [J] . Carlo Sansour, Stefanie Feih, Werner Wagner Engineering Computations . 2003,第7a8期

机译：关于弹性壳大应变变形中增强应变有限元的性能：橡胶材料两类本构模型的比较
2. Simulation on the Laminated Rubber Bearing Tests Using Large Deformation Finite Element Method (Effect of Rubber Material's Compressibility) [J] . Akihiro MATSUDA, Yasuki OTORI, Shuichi YABANA 日本機械学会論文集. A編 . 1999,第635期

机译：大变形有限元法对叠层橡胶轴承试验的模拟（橡胶材料可压缩性的影响）
3. Non-linear finite element constitutive modeling of indentation into super- and ultrahard materials: The plastic deformation of the diamond tip and the ratio of hardness to tensile yield strength of super- and ultrahard nanocomposites [J] . Veprek-Heijman MGJ, Veprek RG, Argon AS, Surface & Coatings Technology . 2009,第22期

机译：压入超硬和超硬材料的非线性有限元本构模型：金刚石尖端的塑性变形以及超硬和超硬纳米复合材料的硬度与拉伸屈服强度之比
4. 3D Finite Element Model Considering Microscopic Material Inhomogeneity for Prediction of Free Surface Roughening Under Tensile Deformation [C] . T.Furushima, K.Manabe, S.Alexandrov 2nd Asian Workshop on Macro/Nano Forming Technology(AWMFT-2009)(第2届亚洲微米纳米技术研讨会） . 2009

机译：考虑微观材料不均匀性的3D有限元模型，用于预测拉伸变形下的自由表面粗糙度
5. ANALYSIS OF DEFORMATION-INDUCED HEATING IN TENSILE TESTING USING A FINITE ELEMENT METHOD. [D] . KIM, YONG HWAN. 1987

机译：拉伸试验中变形诱导加热的有限元分析。
6. Modelling of the material flow of Nd-Fe-B magnets under high temperature deformation via finite element simulation method [O] . Yen-Ju Chen, Yen-I Lee, Wen-Cheng Chang, 2017

机译：Nd-Fe-B磁体高温变形下材料流的有限元模拟
7. Simulation on the Laminated Rubber Bearing Tests Using Large Deformation Finite Element Method. Effect of Rubber Material's Compressibility. [O] . Akihiro MATSUDA, Yasuki OTORI, Shuichi YABANA, 1999

机译：使用大变形有限元法模拟层压橡胶轴承试验。橡胶材料压缩性的影响。
8. Full-Field Reconstruction of Structural Deformations and Loads from Measured Strain Data on a Wing Using the Inverse Finite Element Method. [R] . Miller, E. J., Manalo, R., Tessler, A. 2016

机译：利用逆有限元法对机翼上应变应变数据进行结构变形和载荷的全场重建。

Determining the Compression-Equivalent Deformation of SBR-Based Rubber Material Measured in Tensile Mode Using the Finite Element Method

著录项

引文网络

相似文献

相关主题

期刊订阅