首页> 外文OA文献 >External Gas-Assisted Mold Temperature Control Improves Weld Line Quality in the Injection Molding Process

【2h】

External Gas-Assisted Mold Temperature Control Improves Weld Line Quality in the Injection Molding Process

机译：外部气体辅助模具温度控制提高了注塑过程中的焊接线材质量

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Tran Minh The Uyen; Nguyen Truong Giang; Thanh Trung Do; Tran Anh Son; Pham Son Minh;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. External Gas-Assisted Mold Temperature Control Improves Weld Line Quality in the Injection Molding Process [J] . Tran Minh The Uyen, Nguyen Truong Giang, Thanh Trung Do, Materials . 2020,第12期

机译：外部气体辅助模具温度控制提高了注塑过程中的焊接线材质量
2. Study On The External Gas-Assisted Mold Temperature Control For Thin Wall Injection Molding [J] . ThanhTrung Do, Tran Minh TheUyen, Pham Son Minh International Journal of Engineering Research and Applications . 2017,第3期

机译：薄壁注射成型气辅模具温度控制的研究
3. Integrated Simulations of Structural Performance,Molding Process,and Warpage for Gas-Assisted Injection-Molded Parts.III.Simulation of Cyclic,Transient Variations in Mold Wall Temperatures [J] . Chen Shia-Chung, Hu Sheng-Yan, Jong Wen-Ren Journal of Applied Polymer Science . 1999,第2期

机译：气体辅助注射成型零件的结构性能，成型工艺和翘曲的综合模拟。III。模具壁温度的循环，瞬态变化的模拟
4. Verification of External Gas-Assisted Mold Temperature Control for Injection Molding Process [C] . Pham Son Minh, Thanh Trung Do International Conference on Advanced Engineering and Technology . 2015

机译：用于注射成型过程的外部气体辅助模具温度控制的验证
5. Gas-assisted powder injection molding: A comparison of residual wall thickness between metal cavity vs. SLA cavity and effect of mold temperature on residual wall thickness. [D] . Kim, Donghan. 2010

机译：气体辅助粉末注射成型：金属型腔与SLA型腔之间的残留壁厚比较以及模具温度对残留壁厚的影响。
6. Correction: Speranza V. et al. Hierarchical Structure of iPP During Injection Molding Process with Fast Mold Temperature Evolution. Materials 2019 12 424 [O] . Vito Speranza, Sara Liparoti, Roberto Pantani, 2020

机译：更正：SperanzaV.等。 iPP在注塑过程中的层级结构具有快速的模具温度变化。材料201912424
7. Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process [O] . Phan The Nhan, Thanh Trung Do, Tran Anh Son, 2019

机译：外部气体辅助模具温度控制改善注塑成型工艺中薄肋籽产物熔体流动长度的研究
8. Study of Relationships Between Processing Variables and Properties In Thermoplastic Injection Molded Parts. Selection of Specimen and Process Variables, Mold Design, Instrumentation and Molding Procedure. [R] . McLaughlin, F. A. 1973

机译：热塑性注塑件加工变量与性能关系的研究。样品和工艺变量的选择，模具设计，仪器和成型程序。

External Gas-Assisted Mold Temperature Control Improves Weld Line Quality in the Injection Molding Process

著录项

引文网络

相似文献

相关主题

期刊订阅