首页> 外文OA文献 >Effect of gas pressure on the microstructure of parts foamed with the novel microcellular injection molding technology Ku‐Fizz™

【2h】

Effect of gas pressure on the microstructure of parts foamed with the novel microcellular injection molding technology Ku‐Fizz™

机译：气体压力对新型微孔注塑技术泡沫施用的零件微观结构的影响Ku-Fizz™

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Sara Andrea Simon; Jörg Hain; Tim Osswald;
展开▼
作者单位

展开▼
年度 2021
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Influence of relative low gas counter pressure on melt foaming behavior and surface quality of molded parts in microcellular injection molding process [J] . Shuai Li, Guoqun Zhao, Guilong Wang Journal of Cellular Plastics . 2014,第5期

机译：相对较低的气体反压对微孔注塑过程中成型零件的熔体发泡行为和表面质量的影响
2. Structure and mechanical properties of polystyrene foams made through microcellular injection molding via control mechanisms of gas counter pressure and mold temperature [J] . Shia-Chung Chen, Won-Hsion Liao, Rean-Der Chien International Communications in Heat and Mass Transfer . 2012,第8期

机译：通过气体反压和模具温度的控制机制通过微孔注射成型制得的聚苯乙烯泡沫的结构和力学性能
3. Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening [J] . Wang Guilong, Zhao Guoqun, Dong Guiwei, Journal of Materials Chemistry, C. materials for optical and electronic devices . 2018,第45期

机译：轻质，绝热和低介电微孔高冲击聚苯乙烯（臀部）由带有模具开口的高压泡沫注射成型制造的泡沫
4. THE EFFECTS OF GAS COUNTER PRESSURE COMBINED WITH DYNAMIC MOLD TEMPERATURE CONTROL ON THE SKIN LAYER THICKNESS AND FOAMING CELL SIZE OF MICROCELLULAR INJECTION MOLDING [C] . Shia-Chung Chen, Yu-TsengLin, Ying-Chieh Wang Technical Conference of the Society of Plastics . 2014

机译：气体反压与动态模具温度控制对微孔注射成型的皮肤层厚度和发泡电池尺寸的影响
5. Development of Innovative Gas-Assisted Foam Injection Molding Technology. [D] . Jung, Peter Ungyeong. 2013

机译：开发创新的气体辅助泡沫注射成型技术。
6. Investigation on Foamed PP/Nano-CaCO3 Composites in a Combined in-Mold Decoration and Microcellular Injection Molding Process [O] . Kui Yan, Wei Guo, Huajie Mao, 2020

机译：发泡PP /纳米CaCO3复合材料在模内装饰和微孔注射成型工艺中的研究
7. Correlation between Molding Conditions and Foam Morphology in Microcellular Injection Molding [O] . Takehiro Yamada, Yasuhiko Murata, Hidetoshi Yokoi 2009

机译：微孔注射成型中模塑条件与泡沫形态的相关性

Effect of gas pressure on the microstructure of parts foamed with the novel microcellular injection molding technology Ku‐Fizz™

著录项

引文网络

相似文献

相关主题

期刊订阅