首页> 外文OA文献 >Permittivity Measurement of Thermoplastic Composites at Elevated Temperature
【2h】

Permittivity Measurement of Thermoplastic Composites at Elevated Temperature

机译:升高温度下热塑性复合材料的介电常数测量

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

[Abstract]: The material properties of greatest importance in microwave processing of a dielectric are the complex relative permittivity Epsilon = Epsilon' - jEpsilon'', and the loss tangent, tan Delta = Epsilon'/Epsilon''. This paper describes two convenient laboratory based methods to obtain Epsilon', Epsilon'' and hence tan Delta of fibre-reinforced thermoplastic (FRTP) composites. One method employs a microwave network analyser in conjunction with a waveguide transmission technique, chosen because it provides the widest possible frequency range with high accuracy. The values of the dielectric constant and dielectric loss of glass fibre reinforced (33%) low density polyethylene, LDPE/GF (33%), polystyrene, PS/GF (33%), and Nylon 66/GF (33%), were obtained. Results are compared with those obtained by another method using a high-temperature dielectric probe.
机译:[摘要]:电介质微波处理中最重要的材料性能是复数相对介电常数Epsilon = Epsilon'-jEpsilon”,损耗角正切值tan Delta = Epsilon'/ Epsilon”。本文介绍了两种方便的基于实验室的方法来获得Epsilon',Epsilon''和因此得到的纤维增强热塑性(FRTP)复合材料的tan Delta值。一种方法是将微波网络分析仪与波导传输技术结合使用,选择该方法是因为它以高精度提供了最宽的频率范围。玻璃纤维增​​强(33%)低密度聚乙烯,LDPE / GF(33%),聚苯乙烯,PS / GF(33%)和尼龙66 / GF(33%)的介电常数和介电损耗值为获得。将结果与使用高温介电探针通过另一种方法获得的结果进行比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号