首页> 外文OA文献 >Multi-user Non-Cooperative and Cooperative Systems with HARQ
【2h】

Multi-user Non-Cooperative and Cooperative Systems with HARQ

机译:具有HARQ的多用户非合作与合作系统

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The performance and reliability of wireless communication links can be improved by employing multiple antennas at both ends, thereby creating multiple-input multiple-output (MIMO) channels. However, once multiple co-channel users are added to the system it can be difficult to provide as many receive antennas as transmit antennas, resulting in a so-called overloaded (rank-deficient) system. Under overloaded conditions, maximum likelihood (ML) detection works well, but its exponential complexity prohibits its use and suboptimal linear detectors perform poorly.In this thesis, new signal processing techniques for multi-user overloaded systems using hybrid automatic repeat request (HARQ) protocols are investigated. The HARQ retransmissions are used to form virtual receive antennas, which can efficiently transform an overloaded system into a critically loaded system (i.e. a system with an equal number of transmit and receive antennas).In the first part of the thesis, a multi-user non-cooperative overloaded system is considered. At first, it is demonstrated that the suboptimal linear minimum mean square error (MMSE) detector leads to significant performance degradation compared to an ML detector for such systems. To overcome this drawback, two multi-user transmission schemes are proposed that work well under overloaded conditions. The proposed schemes allow us to apply linear multi-user detection (MUD) algorithms without requiring additional antennas or hardware chains. Monte-Carlo simulations demonstrate that the proposed schemes can result in significant gains in terms of bit-error-rate (BER) and dropped packet performance.In the second part, the performance of multiple HARQ processes for a two-hop multi-source multi-relay decode-and-forward (DF) relaying network with no direct link are analyzed. Dealing with multiple HARQ processes at each relay, a retransmission scheme is proposed that utilizes virtual antennas to achieve increased receive diversity and improved throughput compared to traditional orthogonal (time division) retransmissions. A novel forwarding strategy at the relay(s) to destination link is proposed with the objective of further improving throughput. Finally, the end-to-end outage probability and throughput efficiency of the proposed retransmission and forwarding schemes are found analytically and confirmed with Monte-Carlo simulations.
机译:通过在两端使用多个天线可以提高无线通信链路的性能和可靠性,从而创建多输入多输出(MIMO)通道。但是,一旦将多个同频道用户添加到系统中,可能很难提供与发送天线一样多的接收天线,从而导致所谓的过载(秩不足)系统。在过载的情况下,最大似然(ML)检测效果很好,但其指数复杂度却使其无法使用,并且次优线性检测器的性能也很差。本文采用混合自动重发请求(HARQ)协议为多用户过载系统提供了新的信号处理技术被调查。 HARQ重传用于形成虚拟接收天线,可以将过载的系统有效地转换为临界负载系统(即,具有相等数量的发射和接收天线的系统)。在本文的第一部分,多用户考虑非合作超载系统。首先,证明了与这种系统的ML检测器相比,次优线性最小均方误差(MMSE)检测器导致性能显着下降。为了克服此缺点,提出了两种在过载条件下工作良好的多用户传输方案。提出的方案使我们能够应用线性多用户检测(MUD)算法,而无需额外的天线或硬件链。蒙特卡罗仿真表明,所提出的方案可以显着提高误码率和丢包性能。第二部分,两跳多源多跳多HARQ进程的性能分析了没有直接链路的中继中继解码转发(DF)中继网络。针对每个中继站的多个HARQ过程,提出了一种重传方案,该方案与传统的正交(时分)重传相比,利用虚拟天线实现了更高的接收分集和更高的吞吐量。为了进一步提高吞吐量,提出了一种在中继器到目的链路的新颖转发策略。最后,通过分析找到了建议的重传和转发方案的端到端中断概率和吞吐效率,并通过蒙特卡洛仿真进行了验证。

著录项

  • 作者

    Rauf Zahid;

  • 作者单位
  • 年度 2013
  • 总页数
  • 原文格式 PDF
  • 正文语种 en
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号