首页> 外文OA文献 >The relation between the elastic strengths of steel in tension, compression, and shear

【2h】

The relation between the elastic strengths of steel in tension, compression, and shear

机译：钢的拉伸，压缩和剪切弹性强度之间的关系

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

On cover: University of Illinois bulletin ... vol. XVII, no. 11.

机译：封面：伊利诺伊大学公告……十七号11。

著录项

作者
Seely Fred B.; Putnam William James;
展开▼
作者单位

展开▼
年度 1919
总页数
原文格式 PDF
正文语种 {"code":"en","name":"English","id":9}
中图分类

相似文献

外文文献
中文文献
专利

1. Shear strength of fiber-reinforced high-strength steel ultra-high-performance concrete beams based on refined calculation of compression zone depth considering concrete tension [J] . Qi Jianan, Ding Xiaomeng, Wang Zhen, Advances in Structural Engineering . 2019,第8期

机译：基于考虑混凝土张力的压缩区深度精细计算的纤维增强高强钢超高性能混凝土梁的抗剪强度
2. Shear strength of fiber-reinforced high-strength steel ultra-high-performance concrete beams based on refined calculation of compression zone depth considering concrete tension [J] . Qi Jianan, Ding Xiaomeng, Wang Zhen, Advances in Structural Engineering . 2019,第8期

机译：考虑混凝土张力，纤维增强高强度钢超高性能混凝土梁剪切强度基于精制计算的压缩区深度
3. The influence of a preliminary plastic deformation on the behavior of the magnetic characteristics of high-strength controllably rolled pipe steel under an elastic uniaxial tension (Compression) [J] . Gorkunov E. S., Subachev Yu. V., Povolotskaya A. M., Russian Journal of Nondestructive Testing . 2015,第9期

机译：初始塑性变形对弹性单轴张力（压缩）下高强度可控轧管钢磁性能的影响
4. The post-buckling strength and tension-field action mechanism of Cold-Formed Steel Shear Walls with Steel Sheeting [C] . S. Mohebbi, S.R. Mirghaderi, F. Farahbod, Structural Stability Research Council annual stability conference . 2013

机译：钢板冷弯剪力墙的屈曲后强度及张力场作用机理
5. Ultimate strength of AL-6XN stainless steel plates and box columns under axial compression and shear loads. [D] . Therdphithakvanij, Pholdej. 2005

机译：在轴向压缩和剪切载荷下，AL-6XN不锈钢板和箱形柱的极限强度。
6. Designing a Uniaxial Tension/Compression Test for Springback Analysis in High-Strength Steel Sheets [O] . M. R. Stoudt, L. E. Levine, L. Ma -1

机译：设计用于高强度钢板回弹分析的单轴拉伸/压缩试验
7. Ductility of RC Beams Influenced by Longitudinal Bars Ratio of Compression to Tension and Ratio of Shear Strength to Flexural Strength [O] . 藤田貴弘, 徳重充, 中野克彦, 2009

机译：纵向钢筋的压缩比与拉伸比，抗剪强度与抗弯强度之比对RC梁的延性影响
8. Elastic properties in tension and shear of high strength nonferrous metals and stainless steel - effect of previous deformation and heat treatment [R] . Mebs, R W, Mcadam, D J 1947

机译：高强度有色金属和不锈钢的拉伸和剪切弹性性能 - 先前变形和热处理的影响

The relation between the elastic strengths of steel in tension, compression, and shear

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅