首页> 外文OA文献 >Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode

【2h】

Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode

机译：低温处理工具电极对Inconel 625超合金线切割加工（WEDm）材料去除率和表面粗糙度的研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Ashish Goyal;
展开▼
作者单位

展开▼
年度 2017
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode [J] . Ashish Goyal Journal of King Saud University . 2017,第4期

机译：低温处理工具电极研究Inconel 625超级合金的电火花加工（WEDM）过程中的材料去除率和表面粗糙度
2. Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode [J] . Goyal Ashish Theoretical and Experimental Plant Physiology . 2017,第4期

机译：电气冷冻处理工具电极的电线电气放电加工（WEDM）内材料去除率和表面粗糙度研究
3. The effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM [J] . Jatinder Kapoor, Jaimal Singh Khamba, Sehijpal Singh International Journal of Machining and Machinability of Materials . 2012,第1a2期

机译：电火花加工工艺参数对低温处理线材表面粗糙度和去除率的影响。
4. Investigations on Austenitic Nickel-Chromium based Super Alloys - Inconel 625 and Inconel 718 from Material Removal Rate in Micro Electrochemical Machining [C] . S. Madhankumar, R. Balamurugan, S. Rajesh International Conference on Materials, Manufacturing and Machining . 2019

机译：基于奥氏体镍 - 铬的超优合金 - Inconel 625和Inconel 718的研究免于微电化学加工中的材料去除率
5. Wire electrical discharge machining (WEDM) as a subtractive rapid manufacturing tool. [D] . Yang, Zhi. 2010

机译：线切割加工（WEDM）作为减法快速制造工具。
6. The Influence of Wire Electrical Discharge Machining Cutting Parameters on the Surface Roughness and Flexural Strength of ZrO2/TiN Ceramic Nanocomposites Obtained by Spark Plasma Sintering [O] . Anton Smirnov, Anton Seleznev, Nestor Washington Solís Pinargote, 2019

机译：电气放电加工切削参数对火花等离子烧结获得的ZrO2 /锡陶瓷纳米复合材料表面粗糙度和弯曲强度的影响
7. Prediction of material removal rate and surface roughness for wire electrical discharge machining of nickel using response surface methodology [O] . Thangam Chinnadurai, Subbiah Arungalai Vendan 2016

机译：用响应面法预测镍线电火花加工的材料去除率和表面粗糙度

Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode

著录项

引文网络

相似文献

相关主题

期刊订阅