首页> 外文OA文献 >Adequacy of test standards in evaluating blast overpressure (BOP) protection for the torso
【2h】

Adequacy of test standards in evaluating blast overpressure (BOP) protection for the torso

机译:测试标准是否足以评估躯干的爆炸超压(BOP)保护

摘要

The blast wave emanating from an explosion produces an almost instantaneous rise in pressure which can then cause Blast Overpressure (BOP) injuries to nearby persons. BOP injury criteria are specified in test standards to relate BOP measurements in a testing environment to a risk of BOP injury. This study considered the adequacy of test standards in evaluating BOP protection concepts for the torso.Four potential BOP injury scenarios were studied to determine the likelihood of injury and the adequacy of test standards for appropriate protection concepts. In the case of vehicle blast, BOP injury is unlikely and test standards are adequate. In the scenario involving an explosive charge detonated within a vehicle, and the close proximity to a hand grenade scenario, test standards are not available. The demining scenario was identified as of importance as test standards are available, but do not mandate the evaluation of BOP protection.A prototype South African Torso Surrogate (SATS) was developed to explore this scenario further. The SATS was required to be relatively inexpensive and robust. The SATS was cast from silicone (selected to represent body tissue characteristics) using a torso mould containing a steel frame and instrumented with chest face-on pressure transducer and accelerometer. The SATS was subjected to an Anti-Personnel (AP) mine test and the Chest Wall Velocity Predictor and Viscous Criterion were used to predict that BOP injuries would occur in a typical demining scenario. This result was confirmed by applying the injury criteria to empirical blast predictions from the Blast Effects Calculator Version 4 (BECV4).Although limitations exist in the ability of injury criteria and measurement methods to accurately predict BOP injuries, generally a conservative approach should be taken. Thus, it is recommended that the risk of BOP injuries should be evaluated in demining personal protective equipment test standards.
机译:爆炸产生的爆炸波会产生几乎瞬时的压力上升,从而可能对附近人员造成爆炸超压(BOP)伤害。在测试标准中指定了BOP伤害标准,以将测试环境中的BOP测量值与BOP伤害的风险相关联。本研究考虑了测试标准在评估躯干防喷器保护概念方面的适当性。研究了四种潜在的防喷器伤害情景,以确定伤害的可能性以及适当的保护概念的测试标准的适当性。如果发生车辆爆炸,则不太可能发生BOP伤害,并且测试标准足够。在涉及在车辆内引爆爆炸装药的场景中,以及与手榴弹非常接近的场景中,没有测试标准。随着可用的测试标准,排雷方案被认为是重要的,但没有强制要求对防喷器的保护进行评估。南非原型躯干替代品(SATS)被开发以进一步探索这种方案。 SATS被要求相对便宜且坚固。使用装有钢制框架的躯干模具,从硅树脂(选择来代表身体组织特征的材料)中铸造SATS,并用面对胸部的压力传感器和加速度计进行测量。对SATS进行了杀伤人员地雷测试,并使用了胸壁速度预测器和粘性准则来预测在典型的排雷情况下会发生BOP伤害。通过将伤害标准应用于爆炸效应计算器版本4(BECV4)的经验爆破预测中可以证实这一结果。尽管伤害标准和测量方法准确预测BOP伤害的能力存在局限性,但通常应采取保守的方法。因此,建议在消除个人防护设备测试标准时,应评估BOP受伤的风险。

著录项

  • 作者

    Whyte T;

  • 作者单位
  • 年度 2016
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号