首页> 美国政府科技报告 >Fatality Assessment and Control Evaluation (FACE) Report: Construction Laborer Dies After Being Run Over and Crushed by a Grader at a Road Construction Site in North Carolina
【24h】

Fatality Assessment and Control Evaluation (FACE) Report: Construction Laborer Dies After Being Run Over and Crushed by a Grader at a Road Construction Site in North Carolina

机译:死亡率评估和控制评估(FaCE)报告:建筑工人在北卡罗来纳州道路施工现场被平地机碾压并碾压后死亡

获取原文

摘要

On December 4, 2001, a 54-year-old male construction laborer (the victim) was fatally injured when he was run over and crushed by a motor grader (hereafter termed grader). At the time of the incident, the grader operator was driving the grader in reverse on a road under construction in a housing development. The victim and a coworker were standing in the road at the rear of their parked pickup truck discussing the next stage of their work when the grader operator began backing in their direction. The coworker saw the grader backing toward them and yelled to the operator to stop. The operator did not hear the warning. The back tire of the grader struck the victim, knocking him down. The operator stopped the grader when it struck the rear of the parked pickup truck. The victim was under the rear tire of the grader. The coworker told the operator to pull forward and then called 911 on his cell phone. Emergency medical services (EMS) and police personnel responded within minutes. Emergency care was initiated by EMS personnel and the victim was transported to an area hospital where he died approximately 90 minutes after the incident.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号