首页> 美国政府科技报告 >Passenger Rail Train to Train Impact Test: Test Procedures, Instrumentation, and Data
【24h】

Passenger Rail Train to Train Impact Test: Test Procedures, Instrumentation, and Data

机译:用于列车冲击试验的客运列车:测试程序,仪表和数据

获取原文

摘要

A full-scale passenger rail train-to-train impact test was performed on January 31, 2002, at the Transportation Technology Center, Pueblo, Colorado. The actual speed of impact, as measured by the laser speed trap, was 29.9 mph resulting in a large amount of damage to the leading cab-car, which climbed up onto the nose of the locomotive at an angle of about 20 degrees and then fell off to one side. The end-frame of the cab-car became separated from the center sill, with about 1/2 the length of the cab-car being crushed. There was very little damage to the trailing passenger cars although all of them were derailed during the impact. The nose of the locomotive received very little damage but the roof and windshield of the locomotive received some superficial damage. The locomotive and hopper cars were also derailed during the impact.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号