首页> 美国政府科技报告 >Investigation and Evaluation of Ultra Strength Steel for Missile Boosters

【24h】

Investigation and Evaluation of Ultra Strength Steel for Missile Boosters

机译：导弹增强器超高强度钢的研究与评价

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Three materials, SAE 4142, SAE 4340 and SAE 6140 were evaluated to determine the possibilities of finding a material that has the potentialities of developing a yield strength of 240,000 psi in the heat treated condition,

著录项

作者
Arnold O. Moelk; R. A. Patterson;
展开▼
作者单位

展开▼
年度 1958
页码 1-32
总页数 32
原文格式 PDF
正文语种 eng
中图分类工业技术 ;
关键词

相似文献

外文文献
中文文献
专利

1. Application of high strength and ultra-high strength steel tubes in long hybrid compressive members: Experimental and numerical investigation [J] . Javidan Fatemeh, Heidarpour Amin, Zhao Xiao-Ling, Thin-Walled Structures . 2016 ,第May期

机译：高强度和超高强度钢管在长混合受压构件中的应用：实验与数值研究
2. Investigation of Concrete-Filled Double-Skin Steel Tubular Columns with Ultrahigh-Strength Steel [J] . Hsiao Po-Chien, Hayashi K. Kazuhiro, Nishi Ryousuke, Journal of structural engineering . 2015 ,第7期

机译：超高强度钢管混凝土双壁钢管柱的研究
3. Fiber Laser Welding of Direct-Quenched Ultrahigh Strength Steels: Evaluation of Hardness, Tensile Strength, and Toughness Properties at Subzero Temperatures [J] . Farrokhi Farhang, Siltanen Jukka, Salminen Antti Journal of manufacturing science and engineering: Transactions of the ASME . 2015 ,第6期

机译：直接淬火超高强度钢的光纤激光焊接：零度以下温度下的硬度，拉伸强度和韧性性能评估
4. Hydrogen Embrittlement in Advanced High Strength Steels and Ultra High Strength Steels: a new investigation approach [C] . Antonello Cherubini, Linda Bacchi, Serena Corsinovi, European Conference on Fracture . 2019

机译：先进的高强度钢和超高强度钢材氢气脆化：一种新的调查方法
5. New High Toughness Ultra-high Strength Steels: Effects of Composition and Heat Treatment on Strength and Toughness [D] . Lin, Yu. 2018

机译：新型高韧性超高强度钢：成分和热处理对强度和韧性的影响
6. In-vitro investigation to evaluate the flexural bond strengths of three commercially available ultra low fusing ceramic systems to Grade II Titanium [O] . Vijay Mabrurkar, Nitin Habbu, Sayed Wahhiuddin Hashmi, 2013

机译：进行体外研究以评估三种市售的超低熔点陶瓷系统与II级钛的挠曲结合强度
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

Investigation and Evaluation of Ultra Strength Steel for Missile Boosters

摘要

著录项

相似文献

相关主题

期刊订阅