INSTRUMENT CALIBRATION PROCEDURE AE-13 PORTABLE PRECISION POTENTIOMETER RUBICON 2703 AND 2733

摘要

This procedure describes the calibration of the Rubicon 2703 or 2733 Portable Precision Potentiometer, herein referred to as the Test Instrument.nThis procedure will verify correct performance of the Test Instrument within the required tolerances. Normally, each recorded value will be compared to its tolerance and corrective action taken, if required, before continuing the test. However, it is sometimes desirable to delay the veri-fication and corrective action until several related values have been recorded. Perform any corrective action in accord¬ance with the instruction manual and local laboratory practices. All data must be recorded on the Calibration Report form.