Emissions Characterization of a Heavy-Duty Diesel Truck Engine Operated on Crude and Minimally-Processed Shale Oils

摘要

Three crude shale oils were chosen from six candidates to investigate their possible use as substitutes for No. 2 diesel fuel. Satisfactory hot engine operation was achieved on the crudes using a fuel heating system, allowing emissions characterization during transient and steady-state operation. Regulated gaseous emissions changed little with the crudes compared to diesel fuel; but total particulate and soluble organics increased, and larger injector tip deposits and piston crown erosion were observed. After engine rebuild, two minimally-processed shale oils were run without the fuel heating system, causing no engine problems. Most emissions were higher than for No. 2 fuel using an 80 percent distillate of crude shale oil, but lower using a hydrotreated form of the distillate.