首页> 美国政府科技报告 >Investigation of 3-Inch Linear Casting C-2466A, Which 'Galled' during Attempted Removal from the Cold Work Containers.

【24h】

Investigation of 3-Inch Linear Casting C-2466A, Which 'Galled' during Attempted Removal from the Cold Work Containers.

机译：从冷作集装箱试图消除在3英寸线性的调查铸件C-2466a，其中“擦伤”。

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

No abstract available.

著录项

作者
Hollomon, J. H.; White, A. M.;
展开▼
作者单位

展开▼
年度 1942
页码 1-25
总页数 25
原文格式 PDF
正文语种 eng
中图分类工业技术 ;
关键词
Steel; Gun barrels; Casting; Cold working; Yield strength; Guns; Linings; U/A reports; Galling;

机译：钢;枪管;铸件;冷加工;屈服强度;枪;衬里; U / a报告;擦伤;

相似文献

外文文献
专利

1. Influence of microstructure on galling resistance of cold-work tool steels with different chemical compositions when sliding against ultra-high-strength steel sheets under dry condition [J] . Ko Dae-Cheol, Kim Sung-Gwi, Kim Byung-Min Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 2015 ,第Null期

机译：显微组织对不同化学成分的冷作工具钢在干燥条件下滑动时对耐磨损性的影响
2. Galling resistance and wear mechanisms for cold-work tool steels in lubricated sliding against high strength stainless steel sheets [J] . Patrik Karlsson, Anders Gaard, Pavel Krakhmalev, Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 2012 ,第Null期

机译：冷作工具钢在高强度不锈钢板上润滑滑动时的抗磨损和磨损机理
3. Wear Mechanisms in Galling: Cold Work Tool Materials Sliding Against High-strength Carbon Steel Sheets [J] . A. Gaard, P. Krakhmalev, J. Bergstrom Tribology letters . 2009 ,第1期

机译：磨损中的磨损机理：冷作工具材料在高强度碳钢板上滑动
4. Influence of work material treatment on galling in cold forming [C] . Jannica Heinrichs, Staffan Jacobson World Tribology Congress . 2009

机译：工作材料治疗对冷成型中粘的影响
5. MBBR Ammonia Removal: An Investigation of Nitrification Kinetics, Biofilm and Biomass Response, and Bacterial Population Shifts During Long-Term Cold Temperature Exposure. [D] . Hoang, Valerie. 2013

机译：MBBR氨气去除：长期低温暴露期间硝化动力学，生物膜和生物量反应以及细菌种群迁移的研究。
6. Investigation into the optimal linear time-invariant lag correction for radar artifact removal [O] . Jared Starman, Josh Star-Lack, Gary Virshup, -1

机译：去除雷达伪像的最佳线性时不变滞后校正研究
7. Cold flow defects in zinc die casting: prevention criteria using simulation and experimental investigations [O] . Armillotta Antonio, Fasoli Simone, Guarinoni Alessandro 2016

机译：锌压铸件中的冷流缺陷：使用模拟和实验研究的预防标准
8. Investigation of 3-Inch Linear Casting C-2466A, Which 'Galled' during Attempted Removal from the Cold Work Containers [R] . Hollomon, J. H., White, A. M. 1942

机译：3英寸线性的调查从冷作集装箱试图消除在铸造过程中C-2466a，其中“擦伤”

Investigation of 3-Inch Linear Casting C-2466A, Which 'Galled' during Attempted Removal from the Cold Work Containers.

摘要

著录项

相似文献

相关主题

期刊订阅