DEVELOPMENT OF A DYNAMIC PRESSURE CALIBRATION TECHNIQUE

摘要

The report deals with work continuing on the development of a method of producing 9sinusoidally varying pressures of at least 34 kPa zero-to-peak with amplitude variations within plus or minus 5% up to 2 kHz for the dynamic calibration of pressure transducers. Sinusoidally varying pressures of 34 kPa zero-to-peak were produced between 40 Hz and 750 Hz by vibrating a 10-cm column of a dimethyl siloxane liquid at 36gn zero-to-peak. Damping of the liquid column was accomplished 9by packing the fixture tube with a number of smaller diameter tubes.