首页> 美国政府科技报告 >Pressure distribution and integrated loads at four stations on the space shuttle external tank lox feedline (LA140)

【24h】

Pressure distribution and integrated loads at four stations on the space shuttle external tank lox feedline (LA140)

机译：航天飞机外部水箱lox馈线（La140）上四个站点的压力分布和综合负载

获取原文

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

No Abstract Available

著录项

作者

展开▼
作者单位

展开▼
年度 1979
页码 1-316
总页数 316
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
AEROTHERMODYNAMICS; EXTERNAL TANKS; FEEDERS; PRESSURE DISTRIBUTION; SPACE SHUTTLES; WIND TUNNEL TESTS; AERODYNAMIC LOADS; LIQUID OXYGEN; SCALE MODELS; TABLES (DATA);

机译：气动热力学;外部坦克;馈线;压力分布;太空沙滩;风洞隧道测试;空气动力负荷;液体氧气;尺度模型;表（数据）;

相似文献

外文文献
中文文献
专利

1. Analysis of Space Shuttle External Tank Spray-On Foam Insulation With Internal Pore Pressure [J] . Brett A. Bednarcyk, Jacob Aboudi, Steven M. Arnold, Journal of engineering materials and technology . 2008,第4期

机译：内孔压力的航天飞机外箱外喷式泡沫隔热分析
2. Crane-load contact sensor: In the past, a laser alignment tool proved inaccurate in determining whether the Shuttle External Tank (ET) was floating, resulting in the ET swinging and hitting nearby structures causing damage to the flight element [J] . Nicholas Sheble InTech . 2005,第12期

机译：起重机载荷接触传感器：过去，激光对准工具被证明不能确定航天飞机外部储罐（ET）是否漂浮，从而导致ET摆动并撞击附近的结构，从而损坏飞行元件
3. Lighter Fuel Tank to Permit Heavier Payload on Space Station Shuttle [J] . advanced materials amp, processes group Advanced Materials & Processes . 1998,第2期

机译：较轻的燃油箱允许更大的空间站航天飞机有效载荷
4. Elastic-Plastic Nonlinear Response of a Space Shuttle External Tank Stringer: Part 2 - Thermal and Mechanical Loadings [C] . Norman F. Knight Jr., Jerry E. Warren, Kenny B. Elliott, AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference . 2012

机译：航天飞机外部油箱纵梁的弹塑性非线性响应：第2部分-热负荷和机械负荷
5. Microbiology of aquatic environments: Characterizations of the microbiotas of municipal water supplies, the International Space Station Internal Active Thermal Control System's heat transport fluid, and US Space Shuttle drinking water [D] . Bernardini, James Nicholas, III 2008

机译：水生环境的微生物学：市政供水，国际空间站内部主动热控制系统的传热流体和美国航天飞机饮用水中微生物的特征
6. Lumbar Intervertebral Spacer With Cement Augmentation of Endplates and Integrated Screws as a Fixation Device in an Osteoporotic Model: An In Vitro Kinematic and Load-to-Failure Study [O] . Rayshad Oshtory, Jonathan A. Harris, Pavan D. Patel, 2021

机译：腰椎椎间垫片与水泥增强的骨液模型和集成螺钉作为骨质疏松模型中的固定装置：体外运动和载荷对失败的研究
7. Computational Model of the Chilldown and Propellant Loading of the Space Shuttle External Tank [O] . LeClair Andre C., Majumdar Alok K. 2010

机译：航天飞机外舱降温和推进剂载荷的计算模型
8. Results of tests on a .02 scale space shuttle launch vehicle model (89OTS) in the LARC 16 ft transonic wind tunnel to determine pressure distribution along the external tank LOX cable tray (LA132) [R] . 1980

机译：LaRC 16英尺跨音速风洞中的.02比例航天飞机运载火箭模型（89OTs）测试结果，以确定沿外部水箱LOX电缆桥架（La132）的压力分布

Pressure distribution and integrated loads at four stations on the space shuttle external tank lox feedline (LA140)

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅