Effect of Rawinsonde Errors on Rocketsonde Density and Pressure Profiles: An Error Analysis of the Rawinsonde System

摘要

An initial value of pressure is required to derive the density and pressure profiles of the rocketborne rocketsonde sensor. This tie-on pressure value is obtained from the nearest rawinsonde launch at an altitude where overlapping rawinsonde and rocketsonde measurements occur. An error analysis was performed of the error sources in these sensors that contribute to the error in the tie-on pressure. It was determined that significant tie-on pressure errors result from radiation errors in the rawinsonde rod thermistor, and temperature calibration bias errors. To minimize the effect of these errors radiation corrections should be made to the rawinsonde temperature and the tie-on altitude should be chosen at the lowest altitude of overlapping data. Under these conditions the tie-on error, and consequently the resulting error in the Datasonde pressure and density profiles is less tha 1%. The effect of rawinsonde pressure and temperature errors on the wind and temperature versus height profiles of the rawinsonde was also determined.