首页> 美国政府科技报告 >Variations of a Global Constraint Factor in Cracked Bodies under Tension andBending Loads

【24h】

Variations of a Global Constraint Factor in Cracked Bodies under Tension andBending Loads

机译：张力和弯曲荷载下裂纹体中全局约束因子的变化

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Elastic-plastic finite-element analyses were used to calculate stresses anddisplacements around a crack in finite-thickness plates for an elastic-perfectly

著录项

作者
Newman, J. C.; Crews, J. H.; Bigelow, C. A.; Dawicke, D. S.;
展开▼
作者单位

展开▼
年度 1994
页码
总页数 29
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
Bending; Crack opening displacement; Cracking (Fracturing); Stress concentration; Crack propagation; Cracks; Finite element method; Aluminum alloys; Crack tips; Metal sheets; Plastics; Stress intensity factors; Thickness ratio; Two dimensional models;

机译：弯曲;裂纹开口位移;开裂（压裂）;应力集中;裂纹扩展;裂纹;有限元法;铝合金;裂纹尖端;金属板;塑料;应力强度因子;厚度比;二维模型;

相似文献

外文文献
中文文献
专利

1. Stress Intensity Factor Equation for Center Cracked Tension (CCT) Specimens of Fiber Reinforced Metal Laminates under Cyclic Loading [J] . Y. J. Guo, X. R. Wu Key Engineering Materials . 1998,第Parta1期

机译：循环载荷下纤维增强金属层合板中心开裂应力（CCT）试样的应力强度因子方程
2. Effects of lateral loads and constraints on buckling of cracked thin plates under compressive edge loads [J] . Rahman Seifi, Ali Reza Kabiri Meccanica . 2013,第10期

机译：侧向载荷和约束条件对压缩边缘载荷下裂纹薄板屈曲的影响
3. ON THE PARAMETERS OF GEOMETRIC CONSTRAINTS FOR CRACKED PLATES UNDER TENSION - THREE-DIMENSIONAL PROBLEMS [J] . M. GRABA International Journal of Applied Mechanics and Engineering . 2017,第4期

机译：张力下裂纹板几何约束参数 - 三维问题
4. Variations of constraint and plastic zone size in surface-cracked plates under tension or bending loads [C] . C. R. Aveline Jr., S. R. Daniewicz Symposium on Fatigue and Fracture Mechanics . 2000

机译：张力或弯曲载荷下表面破裂板中约束和塑料区尺寸的变化
5. Alternate Path method in progressive collapse analysis: Variation of dynamic and non-linear load increase factors. [D] . McKay, Aldo E. 2008

机译：渐进倒塌分析中的替代路径方法：动态和非线性载荷增加因子的变化。
6. Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension tension-compression and compression-compression fatigue load [O] . Karel Lietaert, Antonio Cutolo, Dries Boey, -1

机译：拉伸-拉伸拉伸-压缩和压缩-压缩疲劳载荷下增材制造的Ti6Al4V支架的疲劳寿命
7. Variations of a global constraint factor in cracked bodies under tension and bending loads [O] . Bigelow, C. A., Dawicke, D. S., Crews, J. H., Jr., 1994

机译：裂纹和弯曲载荷作用下裂纹体中整体约束因子的变化
8. Variations of a global constraint factor in cracked bodies under tension and bending loads [R] . Newman, J. C., Jr., Crews, J. H., Jr., Bigelow, C. A., 1994

机译：张力和弯曲载荷下裂纹体中全局约束因子的变化

Variations of a Global Constraint Factor in Cracked Bodies under Tension andBending Loads

摘要

著录项

相似文献

相关主题

期刊订阅