首页> 美国政府科技报告 >COMPRESSIVE BUCKLING OF SIMPLY SUPPORTED PLATES WITH LONGITUDINAL STIFFENERS

【24h】

COMPRESSIVE BUCKLING OF SIMPLY SUPPORTED PLATES WITH LONGITUDINAL STIFFENERS

机译：具有纵向加劲肋的简支板的受压屈曲

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Charts are presented for the analysis of the stability under compression of simply supported rectangular plates with one, two, three, and an infinite number of identical equally spaced longitudinal stiffeners that have zero torsional stiffness.

著录项

作者
Paul Seide; Manuel Stein;
展开▼
作者单位

展开▼
年度 1949
页码 1-25
总页数 25
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词

相似文献

外文文献
中文文献
专利

1. Explicit analysis and design equations for buckling loads and minimum stiffener requirements of orthotropic and isotropic plates under compressive load braced by longitudinal stiffeners [J] . Christian Mittelstedt Thin-Walled Structures . 2008,第12期

机译：垂直加劲肋支撑压缩载荷下正交各向异性和各向同性板的屈曲载荷和最小加劲肋要求的显式分析和设计方程
2. On the buckling of an isotropic rectangular plate uniformly compressed on two simply supported edges and with two free unloaded edges [J] . Zureick Abdul-Hamid Thin-Walled Structures . 2018,第MARa期

机译：各向同性矩形板的屈曲在两个简单支撑的边缘上均匀压缩，并带有两个自由的卸载边缘
3. On the buckling of longitudinally stiffened plates, part 2: Eurocode-based design for plate-like behaviour of plates with closed-section stiffeners [J] . Haffar Muhammad Ziad, Kovesdi Balazs, Adany Sandor Thin-Walled Structures . 2019,第Deca期

机译：关于纵向加劲板的屈曲，第2部分：基于Eurocode的带有封闭截面加劲肋的板的板状性能设计
4. COMPRESSIVE BUCKLING PROPERTY REDUCTION OF COMPOSITE PLATES WITH THREE SIMPLY-SUPPORTED AND ONE FREE EDGES DUE TO A DELAMINATION [C] . Hiroshi Suemasu, Takashi Ishikawa, Masaaki Ema, AIAA/ASME/ASCE/AHS/ASC, structures, structural dynamics, and materials conference . 1994

机译：用三个简单地支撑的复合板的压缩屈曲性能减少，并且由于分层而有一个自由边缘
5. Optimization of longitudinal web stiffener location in horizontally curved plate girders. [D] . Issa-El-Khoury, Gaby. 2010

机译：水平弯曲板梁中腹板纵向加劲肋位置的优化。
6. Research on the Buckling Behavior of Functionally Graded Plates with Stiffeners Based on the Third-Order Shear Deformation Theory [O] . Hoang-Nam Nguyen, Tran Cong Tan, Doan Trac Luat, 2019

机译：基于三阶剪切变形理论的功能梯度加筋板屈曲行为研究
7. On the compressive buckling of rectangular plates with advanced-composite-reinforced, central longitudinal stiffeners. [O] . Huss Jerry Francis. 1971

机译：关于带有高级复合材料增强的中央纵向加劲肋的矩形板的压缩屈曲。

COMPRESSIVE BUCKLING OF SIMPLY SUPPORTED PLATES WITH LONGITUDINAL STIFFENERS

摘要

著录项

相似文献

相关主题

期刊订阅