Load Diffusion at an Interspar Opening:Theoretical Methods of Analysis Compared with Strain Measurements on a Large Wing

摘要

The diffusion of load from spar flanges into skin and stringers near an opening was investigated experi¬mentally in a large wing structure undergoing strength tests. A comparison of measured strains with those given by theoretical methods shows that in general the flange loads are represented with reasonable accuracy. Any theory, however, in which the chordwise rib at the edge of the opening is ignored gives shear stresses much greater than those measured. Allowance for the bending stiffness of this rib produces values of shear stress comparable with those obtained experimentally.