Supercritical water oxidation of colored smoke, dye, and pyrotechnic compositions. Phase 1, Final report

摘要

The US military stockpile has large quantities of obsolete munitions awaiting disposal. Although suitable means for the safe dismantlement of much of this stockpile have been identified, there are still considerable quantities of specialty materials for which existing methods have been deemed inappropriate from an environmental standpoint. Among these munitions are colored spotting dyes and a wide assortment of pyrotechnics, including colored smokes and flares. In open bum or incineration treatment processes these materials produce large quantities of toxic, and possibly carcinogenic, gases and particulate matter. The U.S Army Armament Research, Development and Engineering Center at Picatinny Arsenal, NJ is interested in developing a method of treatment that will dispose of these munitions without the difficulties identified above. This report examines the feasibility of supercritical water oxidation, an emerging waste treatment technology, to process these materials. Four colored dyes and one pyrotechnic smoke composition were processed in a flow reactor, and the effluent was analyzed to determine the effectiveness of the processing. The tests showed that all of these materials could by oxidized to much less hazardous compounds in less than 10 seconds with a destruction and removal efficiency (DRE) typically > 99.5%. Two technical issues were identified as needing more attention in Phase II of this project: formation of sulfate and chloride salt deposits within the flow reactor and corrosion of the materials of construction.