首页> 美国政府科技报告 >Dynamic response of a transducer mounted at one end of an acoustical cavity which is subjected to a specified pressure at the open end of the cavity
【24h】

Dynamic response of a transducer mounted at one end of an acoustical cavity which is subjected to a specified pressure at the open end of the cavity

机译:安装在声腔一端的传感器的动态响应,该传声受到腔体开口端的特定压力

获取原文

摘要

The purpose of this report is to develop a mathematical model for a pressure transducer mounted in a fluid filled cavity (a system) and examine the pressure ''measurement'' error of the cavity and transducer by computing the dynamic response (output pressure) of the system to a specified pressure time history (input pressure). The ''measurement'' error is determined by comparing the calculated output pressure to the specified input pressure. The dynamic response of a transducer mounted at one end of a one-dimensional acoustical cavity is determined. The cavity is filled with a compressible isentropic fluid, and the fluid at the open end of the cavity (i.e., the boundary at x = 0) is subjected to a specified uniform axial input pressure. At the other end of the cavity the transducer is represented as a mass, spring, and damper system. Consequently, the boundary condition at x = (ell) is also time dependent. The general solution to the boundary value problem, as well as the steady state solution for periodic excitation, is obtained by integrating a coupled set of ordinary differential equations.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号