Multifrequency crosshole EM imaging for reservoir characterization. FY 1994 annual report

摘要

Electrical conductivity of sedimentary rocks is controlled by the porosity, hydraulic permeability, temperature, saturation, and the pore fluid conductivity. These rock parameters play important roles in the development and production of hydrocarbon (petroleum and natural gas) resources. For these reasons, resistivity well logs have long been used by geologists and reservoir engineers in petroleum industries to map variations in pore fluid, to distinguish between rock types, and to determine completion intervals in wells. Reservoir simulation and process monitoring rely heavily on the physical characteristics of the reservoir model. Over a period of three years (1991-1993), there was an initial phase of crosshole EM technique development via an informal partnership between LLNL and LBL. Researchers developed field instrumentation to apply to oil field for monitoring EOR thermal processes. Specifically, a prototype single-frequency instrumentation was developed and with this system, we have conducted field surveys in four separate locations. Theory and software were developed to interpret these data by providing subsurface images of the electrical conductivity. In spite of our initial success in developing practical EM techniques, we still had severe instrumentation limitations and shortcomings in interpretation for other than simple structures. The field equipment was designed to work only at a single frequency at a time and the transmitter must be opened to change frequencies. The equipment was also significantly noiser at higher frequencies. For high-resolution applications we need to take full advantage of the resolution inherent in the data. The development of a high-resolution subsurface conductivity imaging methods would have benefits far beyond the petroleum application. Such techniques would be very useful in environmental applications, mineral and geothermal exploration, and for civil engineering applications.