Rheology of coal-water slurries prepared by the HP roll mill grinding of coal. Quarterly technical progress report No. 12, June 1, 1995--August 31, 1995

摘要

The objective of this research is the development of improved technology for the preparation of coal-water slurries that have potential for replacing fuel oil in direct combustion. This should be of major importance to the United States in its efforts to reduce dependence on imported oil and to rely more on its enormous low-cost coal resources. In accordance with this objective, in the first stage of this project, considerable work was conducted to standardize experimental procedures for sample preparation, coal grinding, and Theological measurements to assure reproducibility of the experimental results. Since a Haake RV-12 viscometer with an MV-DIN sensor system was found to give the most reproducible results for measurement of slurry viscosities, it has subsequently been used for all of our Theological measurements. Methods were developed for applying the acoustophoresis technique for studying the electrokinetic behavior of concentrated coal-water suspensions. These measurements were carried out using this technique to identify the potential of chemical additives for functioning as reagents for effective dispersion. Detailed investigations of the effect of solids content and chemical additives on the rheology of coal-water slurries, prepared with fines produced by the ball milling of Pittsburgh No. 8 coal, were conducted during the first phase of our research program. These experiments were to provide a baseline against which the rheological behavior of slurries prepared with fines produced by high-pressure roll milling or hybrid high-pressure roll mill/ball mill grinding could be compared.