Decomposition of PCBs in oils using gamma radiolysis: A treatability study. Final report

摘要

This report presents the results of a treatability study of radiologically and PCB contaminated waste hydraulic oils at the Idaho National Engineering Laboratory (INEL). The goal of the study was to demonstrate that PCBs could be selectively removed from the contaminated oils. The PCBs were selectively decomposed in an in-situ fashion via gamma-ray radiolysis. The gamma-ray source was spent nuclear fuel at the Advanced Test Reactor (ATR) canal at the Test Reactor Area (TRA), of the INEL. Exposure to gamma-rays does not induce radioactivity in the exposed solutions. The treatability study was the culmination of five years of research concerning PCB radiolysis conducted at INEL which investigated the mechanism and kinetics of the reaction in several solvents. The major findings of this research are summarized here. Based upon these findings three INEL waste streams were selected for testing of the process. The Environmental Protection Agency (EPA) treatment standard of 2 mg/kg was successfully achieved in all waste streams. The interference of contaminants other than PCBs is discussed.