Micro-grippers for assembly of LIGA parts

摘要

This paper describes ongoing testing of two microgrippers for assembly of LIGA (Lithographie Galvanoformung Abformung) parts. The goal is to place 100 micron outside diameter (OD) LIGA gears with a 50 micron inner diameter hole onto pins ranging from 35 to 49 microns. The first micro gripper is a vacuum gripper made of a 100 micron OD stainless steel tube. The second micro gripper is a set of tweezers fabricated using the LIGA process. Nickel, Permalloy, and copper materials are tested. The tweezers are actuated by a collet mechanism which is closed by a DC linear motor.