Conical shaped charge pressed powder, metal liner jet characterization and penetration in aluminum

摘要

This work was conducted as part of a Near-wellbore Mechanics program at Sandia National Laboratories. An understanding of the interaction of the perforator jet from an explosive shaped charge with the fluid filled porous sandstone media is of basic importance to the completion of oil wells. Tests were conducted using the five-head Flash X-ray Test Site to measure the jet tip velocities and jet geometry for the OMNI and CAPSULE Conical Shaped Charge (CSC) oil well perforator jets fired into air. These tests were conducted to generate jet velocity and geometry information to be used in validating the CTH hydrocode modeling/simulation development of pressed powder, metal liner jets in air. Ten tests were conducted to determine the CSC jet penetration into 6061-T6 aluminum targets. Five tests were conducted with the OMNI CSC at 0.25, 6.0, and 19 inch standoffs from the target. Five tests were conducted with the CAPSULE CSC at 0.60, 5.0, 10.0, and 19 inch standoffs from the target. These tests were conducted to generate jet penetration into homogeneous target information for use in validating the CTH code modeling/simulation of pressed powder, metal liner jets penetrating aluminum targets. The Flash X-ray radiographs, jet velocities, jet diameters, and jet lengths data for jets fired into air are presented in this report. The jet penetration into aluminum and penetration hole profile data are also presented for the OMNI and CAPSULE perforators. Least Squares fits are presented for the measured jet velocity and jet penetration data.