首页> 美国政府科技报告 >Study of Material Consolidation at Higher Throughput Parameters in Selective Laser Melting of Inconel 718.

【24h】

Study of Material Consolidation at Higher Throughput Parameters in Selective Laser Melting of Inconel 718.

机译：Inconel 718选择性激光熔化中较高通量参数下材料固结的研究。

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

No abstract available

著录项

作者
Prater, T.;
展开▼
作者单位

展开▼
年度 2016
页码 1-27
总页数 27
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
Inconel (trademark); Melting; Lasers; Additive manufacturing; Heat treatment; Porosity; Density (mass/volume); Computer aided manufacturing; Dimensional measurement; Welded joints;

机译：Inconel（注册商标）;熔化;激光;添加剂制造;热处理;孔隙率;密度（质量/体积）;计算机辅助制造;尺寸测量;焊接接头;
入库时间 2022-08-29 10:46:16

相似文献

外文文献
中文文献
专利

1. Effects of welding parameters on laser weldability of inconel 718. Study of laser weldability of Ni-base, heat-resistant superalloys(1st report) [J] . K. Shinozaki, H. Kuroki Welding International . 1999,第12期

机译：焊接参数对Inconel 718激光焊接性的影响。镍基耐热高温合金的激光焊接性研究（第1次报告）
2. Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625 [J] . Criales Luis E., Arisoy Yigit M., Ozel Tugrul The International Journal of Advanced Manufacturing Technology . 2016,第9a12期

机译：Inconel 625选择性激光熔化的有限元建模中材料和工艺参数的敏感性分析
3. Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625 [J] . Criales Luis E., Arisoy Yigit M., Ozel Tugrul The International Journal of Advanced Manufacturing Technology . 2016,第9a12期

机译：Inconel 625选择性激光熔化的有限元建模中材料和工艺参数的敏感性分析
4. A SENSITIVITY ANALYSIS STUDY ON THE MATERIAL PROPERTIES AND PROCESS PARAMETERS FOR SELECTIVE LASER MELTING OF INCONEL 625 [C] . Luis E. Criales, Yigit M. Arisoy, Tugrul OEzel ASME international manufacturing science and engineering conference . 2015

机译：Innonel 625选择性激光熔炼材料性能和工艺参数的敏感性分析。
5. Microstructural Control and Elevated Temperature Mechanical Properties of Inconel 718 Manufactured by Selective Laser Melting [D] . ?McLouth, Tait DeWitt 2020

机译：选择性激光熔融制造的Inconel 718的微观结构控制和高温力学性能
6. Numerical-Experimental Study of the Consolidation Phenomenon in the Selective Laser Melting Process with a Thermo-Fluidic Coupled Model [O] . Francisco Cordovilla, Ángel García-Beltrán, Miguel Garzón, 2018

机译：热流耦合模型在选择性激光熔化过程中固结现象的数值试验研究
7. Influence of different Processing Parameter on distortion and Residual Stress of Inconel 718 Alloys Fabricated by Selective Laser Melting (SLM) [O] . Yu-shuang Huo, Chang Hong, Huai-xue Li, 2020

机译：不同加工参数对选择性激光熔化（SLM）制造的第718型合金失真和残余应力的影响

Study of Material Consolidation at Higher Throughput Parameters in Selective Laser Melting of Inconel 718.

摘要

著录项

相似文献

相关主题

期刊订阅