Adiabatic Matching Section Solution for the Source Injector

摘要

Typical designs for a Heavy Ion Fusion Power Plant require the source injector todeliver 100 beams, packed into an array with a spacing of 7 cm. When designing source injectors using a single large aperture source for each beam, the emitter surfaces are packed into an array with a spacing of 30 cm. Thus, the matching section of the source injector must not only prepare the beam for transport in a FODO lattice, but also funnel the beams together. This can be accomplished by an ESQ matching section in which each beam travels on average at a slight angle to the axis of the quadrupoles and uses the focusing effect of the FODO lattice to maintain the angle. At the end of the matching section, doublet steering is used to bring the beams parallel to each other for injection into the main accelerator. A specific solution of this type for an 84-beam source injector is presented. PACS: 41.75.Ak,41.85.Ar, 41.85.Ja