Slow Radio-Frequency Processing of Large Oil Shale Volumes to Produce Petroleum-like Shale Oil

摘要

A process is proposed to convert oil shale by radio frequency heating over a period of months to years to create a product similar to natural petroleum. Electrodes would be placed in drill holes, either vertical or horizontal, and a radio frequency chosen so that the penetration depth of the radio waves is of the order of tens to hundreds of meters. A combination of excess volume production and overburden compaction drives the oil and gas from the shale into the drill holes, where it is pumped to the surface. Electrical energy for the process could be provided initially by excess regional capacity, especially off-peak power, which would generate (approx)3 x 10(sup 5) bbl/day of synthetic crude oil, depending on shale grade. The electricity cost, using conservative efficiency assumptions, is$4.70 to$6.30/bbl, depending on grade and heating rate. At steady state, co-produced gas can generate more than half the electric power needed for the process, with the fraction depending on oil shale grade. This would increase production to 7.3 x 10 (sup 5) bbl/day for 104 l/Mg shale and 1.6 x 10(sup 6) bbl/day for 146 l/Mg shale using a combination of off-peak power and power from co-produced gas.